Ft Paints Chassis Paint - 1100ml - Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and DIY enthusiasts working on truck and commercial vehicle chassis. The Ft Paints 2K PU265 HS Chassis Topcoat in Blue offers a high-build, durable finish with excellent corrosion and weather resistance, providing a key win for long-term protection. A caveat to consider is the need for proper ventilation and personal protective equipment due to its chemical composition.
All features
| Colour | Blue |
|---|---|
| Model Part Number | 2K PU265 |
| Brand | FT Paints |
| Container Volume | 1100ml |
Extended Product Information
FAQs
What is the shelf life of this product?
The shelf life is typically indicated on the product packaging. It is crucial to use the product within this timeframe and store it in a cool, dry place as recommended by the manufacturer.
How long does it take for the chassis paint to be fully cured?
The paint is dust-dry in 15-30 minutes. However, it requires a full cure which typically takes 7-8 days under standard conditions for maximum durability.
Can I apply this paint over existing paint?
Yes, provided the existing paint is sound, clean, and properly prepared. It is advisable to test adhesion on a small, inconspicuous area first or consult the manufacturer's guidelines for compatibility.
What is the recommended temperature for application?
Application temperatures should generally be between 10°C and 30°C. Always refer to the product data sheet for specific temperature and humidity recommendations.
Is thinning required for all application methods?
Thinning may be required depending on the application method and environmental conditions to achieve the desired viscosity. Refer to the product data sheet for recommended thinners and percentages for each method.
How should I clean my spray equipment after use?
Clean spray equipment immediately after use with a suitable solvent. Refer to the product's technical data sheet for the most appropriate solvent recommendation.
What safety precautions should I take when using this product?
Always use in a well-ventilated area and wear appropriate personal protective equipment (PPE), including a respirator, chemical-resistant gloves, and safety glasses. Consult the Safety Data Sheet (SDS) for detailed information.
Troubleshooting
Paint is not drying or curing properly
Ensure correct mixing ratios of paint, hardener, and thinner. Verify ambient temperature and humidity are within the recommended application range. Check if the product is within its shelf life.
Poor adhesion to the substrate
The surface may not have been adequately prepared. Re-clean and degrease the surface thoroughly. Ensure the surface was properly primed with a compatible primer, and check for any contaminants.
Sagging or runs in the paint film
Applied too thickly or too close to the surface, especially with spray application. Reduce the film thickness per coat, increase spray distance, or adjust spray pattern. Ensure correct viscosity through proper thinning.
Surface defects like pinholes or blistering
May be caused by moisture or contaminants on the substrate, improper mixing, or excessive heat during application/drying. Ensure surfaces are dry and clean. Mix components thoroughly and apply in recommended conditions.
Pros and Cons
Pros
- Offers superior, long-lasting protection for commercial vehicle chassis.
- Provides excellent resistance to corrosion, weather, and solvents.
- The high-build formula ensures a robust and durable finish.
- Suitable for a wide range of application methods for user convenience.
- Fast drying times improve efficiency during application.
Cons
- Requires proper safety equipment and ventilation due to its two-component nature.
- Full cure takes 7-8 days, meaning the surface is vulnerable to damage during this period.
- Surface preparation is critical for optimal adhesion and performance.
- May not be suitable for very thin or delicate substrates without appropriate testing.
Setup, Compatibility & Care
Setup: This is a two-component (2K) system requiring mixing of the paint, hardener, and thinner in the specified ratios (provided with the product kit). Ensure thorough mixing for optimal performance. Use within the pot life specified by the manufacturer.
Compatibility: The coating strongly adheres to properly prepared surfaces of steel, galvanized steel, and aluminum. It is designed to be applied over compatible primers. Ensure that any existing coatings are sound and compatible, or removed.
Application: Suitable for electrostatic, Airmix, Airless, and brush application. Follow manufacturer guidelines for spray gun setup, pressure, and nozzle size depending on the chosen method. Ensure good ventilation and use appropriate personal protective equipment (PPE), including respirators, gloves, and eye protection.
Care: Clean application equipment immediately after use with a suitable solvent. Once fully cured, the surface can be cleaned with mild detergents and water. Avoid abrasive cleaners or harsh solvents that could damage the finish.