Ft Paints Chassis Paint - Satin Gloss Finish - Signal Yellow
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for owners and operators of commercial vehicles and trucks needing a durable, protective, and aesthetically pleasing finish for their chassis. The key benefit is robust, long-lasting protection against corrosion and environmental damage, leading to extended vehicle lifespan. A potential caveat is the requirement for specific application techniques due to its two-component nature. The Ft Paints RT 2K PU265 HS Chassis Topcoat is a high-build polyurethane acrylic coating, featuring a semi-gloss Signal Yellow finish, reinforced with zinc phosphate for active corrosion protection. It offers excellent resistance to weather, UV, and solvents, and bonds effectively to various metal surfaces.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | FT-PU265-P3.81L-H0.95L-T0.74L-SG-SS |
| Brand | FT Paints |
| Container Volume | 5500 |
Extended Product Information
FAQs
What is the correct mixing ratio for the 5.50L kit?
The 5.50L kit includes 3.81L of paint, 0.95L of hardener, and 0.74L of thinner. Always refer to the product's technical data sheet for precise mixing ratios, as variations may occur.
How long does the paint take to fully cure?
Under standard conditions, the paint achieves dust-dry in 15-30 minutes but requires 7-8 days for a full cure. Avoid heavy use or exposure to harsh conditions until fully cured.
Can this paint be applied with a brush?
Yes, this coating is suitable for brush application, though care must be taken to achieve an even finish and avoid brush marks. Spray application methods are generally recommended for larger areas.
What surfaces can this chassis topcoat be applied to?
It is designed for strong adhesion to steel, galvanised steel, and aluminium surfaces. Ensure all surfaces are properly prepared and clean before application.
Is this product suitable for exterior chassis components exposed to weather?
Absolutely. It offers outstanding resistance to UV rays, outdoor exposure, and solvents, making it ideal for long-lasting protection of vehicle chassis in various environmental conditions.
What are the safety precautions for using this product?
Always use in a well-ventilated area and wear appropriate personal protective equipment (PPE), including a respirator, chemical-resistant gloves, and eye protection. Consult the Safety Data Sheet (SDS) for detailed safety information.
How resistant is the coating to heat?
The coating can withstand short-term exposure to temperatures up to 180°C, making it suitable for components that experience significant heat.
Troubleshooting
Paint not drying or curing properly
Verify the correct mixing ratio of paint and hardener. Ensure application temperatures are within the recommended range and humidity levels are not excessive. Check if the correct hardener for this specific product has been used.
Poor adhesion to the surface
Ensure the substrate was properly prepared, cleaned, and degreased before application. Re-check compatibility with the substrate material. Sanding the surface to create a key may be necessary.
Runs or sags in the coating
The coating may have been applied too thickly or at too low a viscosity. Reduce the amount applied per coat and ensure the correct thinner has been used to achieve the recommended application viscosity.
Pinholes or blistering
This can be caused by moisture or air trapped in the coating. Ensure the surface is completely dry before application. If spraying, check air pressure and nozzle settings, and avoid applying too close to the surface.
Pros and Cons
Pros
- Provides exceptional durability and protection for heavy-duty vehicle chassis.
- Excellent resistance to corrosion, UV radiation, and solvents.
- Achieves a professional, smooth semi-gloss finish.
- Suitable for a wide range of metal surfaces.
- Fast drying time improves application efficiency.
- Withstands high temperatures, adding to its robust nature.
Cons
- Requires careful mixing of two components (paint and hardener).
- Application may require specialized equipment for optimal results (e.g., spray gun).
- A full cure takes several days, requiring patience before heavy use.
- Signal Yellow may not be suitable for all vehicle aesthetic requirements.
- Ventilation and personal protective equipment are essential during application.
Setup, Compatibility & Care
Setup: This is a two-component (2K) product. Ensure the correct ratio of paint (3.81L), hardener (0.95L), and thinner (0.74L) is mixed thoroughly before application. Follow the manufacturer's recommended mixing ratios precisely. Stir until a uniform consistency is achieved.
Compatibility: The coating is designed to adhere strongly to steel, galvanised steel, and aluminium. Ensure surfaces are clean, dry, and free from grease, oil, and existing contaminants before application. Priming may be recommended for certain substrates or conditions, consult the manufacturer's technical data sheet.
Application: Suitable for electrostatic, Airmix, Airless, and brush application methods. Ensure adequate ventilation and use appropriate personal protective equipment (PPE), including a respirator, gloves, and eye protection.
Care: Once fully cured, the surface is durable and resistant. Cleaning can typically be done with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the finish. Regularly inspect the chassis for any signs of damage that might require touch-up.