FabioT. FT Paints Chassis Paint - 20000 ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 20L Grey Chassis Paint Kit from FabioT. FT Paints is designed for professionals and DIY enthusiasts seeking robust protection for truck and commercial vehicle chassis. Its high-build polyurethane acrylic formula, fortified with zinc phosphate, offers superior corrosion resistance and a durable semi-gloss finish. While providing excellent protection against weather, UV, and solvents, users should be aware of the required mixing ratios and adequate ventilation during application.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FabioT. |
| Container Volume | 20000 |
Extended Product Information
FAQs
What is the shelf life of the paint and hardener?
The shelf life varies for paint and hardener components. Refer to the product's technical data sheet or packaging for specific expiry dates.
Can I use a different type of thinner?
It is strongly recommended to use the thinner specified by FabioT. FT Paints. Using an incorrect thinner can affect drying times, adhesion, and overall finish quality.
How should I store the unused mixed paint?
Mixed 2K paint has a limited pot life and should be used within the recommended time frame. Unused *unmixed* components should be stored in their original, tightly sealed containers in a cool, dry place away from direct sunlight.
Is this paint suitable for interior applications?
This product is specifically formulated for heavy-duty chassis protection. While it can be used indoors for structural steel, ensure adequate ventilation during application and curing. For interior decorative finishes, a different product may be more suitable.
What personal protective equipment (PPE) is required?
During application, it is essential to wear a suitable respirator, chemical-resistant gloves, safety glasses or goggles, and protective clothing to avoid skin and respiratory exposure.
How do I clean up spray equipment?
Clean spray guns and equipment immediately after use with the appropriate thinner recommended for this paint system. Ensure thorough rinsing to prevent blockages.
What is the temperature range for application?
Generally, apply between 10°C and 30°C. Avoid applying in direct sunlight, high humidity, or when surfaces are very hot or cold. Refer to the technical data sheet for precise temperature guidelines.
Troubleshooting
Paint not drying or curing properly
Check that the correct hardener and thinner ratios were used. Ensure ambient temperature and humidity are within recommended application ranges. Verify that the product has not exceeded its shelf life.
Poor adhesion to the surface
Ensure the substrate was properly prepared, cleaned, and free from contaminants like oil, grease, or rust. A suitable primer may be required for certain surfaces (e.g., galvanised steel, aluminium).
Uneven finish or spray pattern
Adjust spray gun settings (pressure, fan width, fluid tip). Ensure consistent technique and maintain correct distance from the surface. Check for blockages in the spray gun or filter.
Bubbling or blistering during application
This can be caused by applying the paint too thickly, poor ventilation, or applying to a surface that is too hot. Apply in thinner coats and ensure good airflow.
Pros and Cons
Pros
- Provides long-lasting, heavy-duty protection for vehicle chassis.
- Excellent resistance to corrosion, weathering, and chemical exposure.
- Suitable for a variety of application methods, offering flexibility.
- Fast drying times can speed up the painting process.
- High-build formula ensures a thick, protective layer.
Cons
- Requires proper mixing of paint, hardener, and thinner according to specified ratios.
- Application requires adequate ventilation and appropriate personal protective equipment (PPE).
- Full cure time of 7-8 days means the surface should be handled with care during this period.
- 20L kit may be excessive for small or occasional use projects.
Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from rust, grease, and previous coatings. For best results, prime steel surfaces with an appropriate primer. For galvanised steel and aluminium, use a suitable primer designed for these substrates.
Mixing: This is a 2K (two-component) system. Accurately mix the paint, hardener, and thinner according to the manufacturer's recommended ratio (typically found on the product's technical data sheet). Incorrect mixing will compromise performance and durability. Stir thoroughly until uniform.
Application: Apply using electrostatic, Airmix, Airless spray, or brush. Ensure adequate ventilation during application. Wear appropriate PPE, including a respirator, gloves, and eye protection.
Drying and Curing: The paint will be dust-dry in 15-30 minutes. Handle with care after this stage. A full cure, providing maximum hardness and resistance, will take approximately 7-8 days under standard conditions.
Compatibility: Compatible with steel, galvanised steel, and aluminium. Always test on a small, inconspicuous area if unsure about substrate compatibility.
Care: Clean application equipment immediately after use with appropriate thinners. For the painted surface, clean with mild detergents and water. Avoid abrasive cleaners.