Ft Paints 2.75 L Kit Chassis Paint With Satin Gloss Finish For Aluminium - Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Ft Paints RT 2K PU265 HS Chassis Topcoat is designed for professionals and serious DIYers seeking robust, long-lasting protection for truck and commercial vehicle chassis. Its key benefit is superior defense against corrosion and environmental damage, thanks to a high-build, zinc phosphate-reinforced formula. A minor caveat is its two-component nature, requiring careful mixing for optimal performance.
All features
| Colour | Red |
|---|---|
| Model Part Number | FT-PU265-P1.90L-H0.48L-T0.37L-SG-AL |
| Brand | FT Paints |
| Container Volume | 2750ml |
Extended Product Information
FAQs
What is the mixing ratio for the 2.75L kit?
The exact mixing ratio of paint, hardener, and thinner can vary. Always refer to the specific technical data sheet provided with your product batch for the precise ratios and induction time.
What is the pot life of the mixed product?
The pot life, or working time, of the mixed coating is limited. Consult the product's technical data sheet for the specific pot life at the recommended application temperature.
Can this be applied with a brush?
Yes, the Ft Paints RT 2K PU265 HS Chassis Topcoat is suitable for brush application, though spray methods may yield a smoother finish.
What is the maximum temperature resistance?
This coating is heat resistant up to 180°C.
How long does it take to dry?
The drying time is fast, but specific times for touch-dry and recoat depend on application thickness, temperature, and humidity. Refer to the technical data sheet for detailed drying information.
What surfaces can this paint be used on?
It is designed for heavy-duty protection and adheres well to steel, galvanized steel, and aluminum chassis components.
Is this paint suitable for automotive bodywork?
While it offers excellent protection, it is specifically formulated as a chassis topcoat for heavy-duty vehicles. For automotive bodywork, other specialized finishes may be more appropriate.
Troubleshooting
Uneven finish or poor flow
Ensure correct mixing ratios of paint, hardener, and thinner. Check application temperature and humidity. Clean spray equipment thoroughly.
Coating does not adhere properly
Verify surface preparation. The substrate must be clean, dry, and free from grease or rust. Ensure compatibility with the substrate material.
Slow drying time
Check ambient temperature and humidity; lower temperatures or high humidity can slow drying. Ensure correct hardener and thinner have been used according to the product specifications.
Bubbles or pinholes in the finish
This can be caused by moisture or contaminants on the surface, or by applying the coating too thickly. Ensure proper surface preparation and ventilation during application.
Pros and Cons
Pros
- Provides exceptional durability and protection for heavy-duty chassis.
- Offers excellent resistance to environmental factors and chemicals.
- Fast-drying formula speeds up the painting process.
- Good adhesion to various metal substrates.
- Professional semi-gloss finish enhances appearance and cleanability.
Cons
- Requires precise mixing of two components (paint, hardener, thinner) which can be complex for beginners.
- Specific ventilation and personal protective equipment are necessary due to its chemical composition.
- May require specialized application equipment for best results (e.g., spray guns).
- The 'Red' color may not be suitable for all aesthetic preferences or applications.
- A minimum of 2750ml is required, which might be excessive for very small jobs.
Setup, Compatibility & Care
Setup:
This is a two-component system. Before application, thoroughly mix the paint, hardener, and thinner in the specified ratios. Consult the product's technical data sheet for precise mixing ratios and induction times. Ensure the application surface is clean, dry, and free from contaminants like grease, oil, or old paint.
Compatibility:
Suitable for application on steel, galvanized steel, and aluminum. It adheres well to properly prepared surfaces, including existing coatings if they are sound and compatible. It is recommended to perform a small test patch on an inconspicuous area if unsure about substrate compatibility.
Care:
Clean application tools immediately after use with a suitable solvent. For the coated chassis, regular washing with mild detergents and water is recommended to remove dirt and corrosive substances. Avoid abrasive cleaners that could damage the semi-gloss finish.