Ft Paints Chassis Paint - 2750ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and serious DIYers looking to protect and enhance the chassis of trucks and commercial vehicles. The Ft Paints RT 2K PU265 HS Chassis Topcoat offers durable, high-build protection with excellent corrosion and weather resistance. A key benefit is its professional semi-gloss finish and strong adhesion to various metal surfaces. However, it requires specific mixing ratios and a proper application environment for optimal results.
All features
| Colour | Grey |
|---|---|
| Model Part Number | 2K PU265 HS |
| Brand | FT Paints |
| Container Volume | 2750ml |
Extended Product Information
FAQs
What is the shelf life of the unmixed components?
Refer to the product packaging or technical data sheet for specific shelf life information. Generally, unopened containers stored correctly will have a usable shelf life of at least one year.
Can I use a different hardener or thinner?
It is strongly recommended to use only the specified hardener and thinner recommended by Ft Paints for this product. Using incompatible products can lead to poor performance, failure, or hazardous reactions.
How much area can 2750ml cover?
Coverage depends heavily on the application method and substrate. A general guideline for high-build coatings is approximately 8-10 square meters per liter at the recommended film thickness. For the 2.75L kit, this would roughly cover 22-27.5 square meters.
What safety precautions should I take?
Always use in a well-ventilated area. Wear appropriate personal protective equipment (PPE), including a respirator rated for organic vapors, chemical-resistant gloves, and eye protection. Consult the Safety Data Sheet (SDS) for detailed safety information.
Is this product suitable for interior vehicle parts?
While it offers excellent protection, its primary design is for heavy-duty external chassis applications. For interior parts, consider specific interior coatings that may offer better aesthetic and tactile properties.
How long does the mixed paint remain usable?
The pot life of the mixed 2K product is typically short, usually between 1 to 2 hours at 20°C. Use the mixed material within this time frame, as it will begin to harden in the container.
Can I apply a second coat?
Yes, a second coat can be applied. Ensure the first coat is within the recoat window (refer to technical data sheet for specific times) to allow for optimal intercoat adhesion. If recoating outside this window, light abrasion may be necessary.
Troubleshooting
Paint not drying or curing properly
Ensure correct hardener and thinner ratios were used. Check ambient temperature and humidity; conditions may be too cold or humid. Verify product freshness.
Poor adhesion or flaking
Surface was not adequately prepared. Ensure it was clean, dry, and properly abraded. Remove any contaminants like oil or grease before application.
Runs or sags in the finish
Applied too thickly, or spray gun settings are incorrect (too close, too much material). Reduce application rate, increase spray distance, or use thinner coats.
Orange peel effect
Incorrect spray viscosity or technique. Adjust thinner amount, check spray gun air pressure and fan pattern, and maintain consistent speed and distance.
Product has separated in the can
This is normal for some formulations. Stir thoroughly until a homogenous mixture is achieved. If separation is extreme or products are past shelf life, they may be compromised.
Pros and Cons
Pros
- Provides superior, long-lasting protection for commercial vehicle chassis.
- Excellent resistance to corrosion, weather, and UV damage.
- Professional semi-gloss finish enhances appearance.
- Fast drying times improve application efficiency.
- Good adhesion to a variety of metal surfaces.
Cons
- Requires careful mixing of paint, hardener, and thinner.
- Application may require specialized equipment for best results.
- Full cure time of 7-8 days means the vehicle is out of service for an extended period.
- Performance is dependent on proper surface preparation.
- Requires adequate ventilation during application due to 2K formulation.
Setup, Compatibility & Care
Setup:
- Surface Preparation: Ensure the surface is clean, dry, and free from grease, oil, and existing loose paint or rust. Abrade surfaces for optimal adhesion.
- Mixing: This is a 2K (two-component) system. The kit contains paint, hardener, and thinner. Adhere strictly to the recommended mixing ratios (typically found on the product label or technical data sheet) using a calibrated mixing scale or cup. Mix thoroughly for 2-3 minutes.
- Application Conditions: Apply in a well-ventilated area, away from dust and moisture. Recommended application temperature is between 15°C and 25°C.
Compatibility:
- Surfaces: Suitable for direct application onto clean steel, galvanised steel, and aluminium.
- Application Methods: Compatible with electrostatic, Airmix, Airless spray guns, and brush application.
Care:
- Cleaning: Clean tools and equipment immediately after use with a suitable solvent.
- Storage: Store the mixed product within its pot life (typically 1-2 hours after mixing) at the recommended temperature. Unmixed components should be stored in a cool, dry place, away from direct sunlight.