Ft Paints Texture Paint Kit - 1100ml - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K Polyurethane Texture Paint is a premium semi-gloss, textured topcoat designed for professionals seeking a durable and visually appealing finish on industrial machinery, components, tools, and steel structures. Its key benefit is providing a tough, defect-hiding surface that offers excellent resistance to impact, UV, weather, chemicals, and solvents. A potential caveat is that its 2K formula requires proper mixing and ventilation due to the use of a hardener and thinner.
All features
| Colour | Green |
|---|---|
| Model Part Number | FT-PU300-P0.76L-H0.19L-T0.15L-M-CV |
| Brand | FabioT. |
| Container Volume | 1100ml |
Extended Product Information
FAQs
What is a 2K polyurethane paint system?
A 2K (two-component) system means the paint requires mixing with a separate hardener before application. This chemical reaction creates a highly durable and resistant coating once cured.
What surfaces can this paint be applied to?
This paint is specifically designed for metal surfaces, including industrial machinery, components, tools, and steel structures. Proper surface preparation is crucial for all applications.
How much thinner and hardener should I use?
Refer to the product's technical data sheet for the exact mixing ratios of paint, hardener, and thinner. Using incorrect ratios can affect performance and durability.
What is the drying and curing time?
Drying and curing times vary based on temperature, humidity, and film thickness. Refer to the technical data sheet for specific times, but note that full hardness develops over several days.
Is this paint suitable for exterior use?
Yes, the RT 2K Polyurethane Texture Paint is UV and weather resistant, making it suitable for reliable outdoor durability.
Can I use this paint indoors?
While it can be used indoors, ensure adequate ventilation due to the chemical nature of 2K paints. It is primarily designed for industrial applications where its protective qualities are most beneficial.
What is the texture finish like?
The paint provides a semi-gloss, textured finish that helps to hide surface imperfections and offers a professional, decorative appearance.
Troubleshooting
Paint not curing or hardening properly.
Ensure the correct hardener ratio was used and that it was mixed thoroughly with the paint. Verify that the components were stored correctly and are within their shelf life.
Poor adhesion to the surface.
The surface may not have been adequately prepared. Ensure it was clean, dry, and properly abraded if necessary. Check for contamination like grease or oil.
Uneven texture or spray pattern.
Adjust spray gun settings (pressure, nozzle size) and maintain a consistent distance and speed during application. Ensure the paint mixture is uniform and free of lumps.
Runs or drips during application.
The paint may be applied too thickly, or the viscosity is too low. Reduce the amount of paint applied per coat, or adjust thinner/hardener ratios as per the technical data sheet.
Coating is susceptible to scratching shortly after application.
Allow the coating to cure fully. The full hardness of polyurethane coatings develops over time, even after initial drying.
Pros and Cons
Pros
- Provides a durable, professional-looking finish that hides surface defects.
- Excellent resistance to impact, UV, weather, chemicals, and solvents.
- Formulated for demanding industrial and commercial applications.
- Offers strong adhesion and good flow for even coverage.
- Suitable for both spray gun and airless application methods.
Cons
- Requires mixing of paint, hardener, and thinner (2K system).
- Proper ventilation is necessary due to chemical components.
- May require specialized application equipment for best results.
- Textured finish can be more challenging to clean than smooth surfaces.
- Not suitable for interior decorative use where extreme durability is not needed.
Setup, Compatibility & Care
Setup:
This is a 2K (two-component) system. Before application, the paint must be thoroughly mixed with the appropriate hardener and thinner in the specified ratios. Ensure all components are at room temperature for optimal mixing and application.
Application:
- Surface Preparation: Ensure the surface is clean, dry, and free from grease, oil, and rust. Light abrasion may be necessary for optimal adhesion.
- Mixing: Combine the RT 2K Polyurethane Texture Paint, Hardener, and Thinner according to the product's technical data sheet instructions. Mix thoroughly until a uniform consistency is achieved.
- Application Method: Apply using a spray gun or airless spraying equipment. Maintain consistent spray patterns and distances for even coverage.
Compatibility:
Designed primarily for metal surfaces, including industrial machinery, components, tools, and steel structures. It is compatible with most standard primers suitable for metal.
Care:
To maintain the finish, clean the surface with mild detergents and water. Avoid abrasive cleaners or solvents that could degrade the coating. For any maintenance, ensure the area is well-ventilated.