Ft Paints Texture Paint Kit For Commercial Vehicles - Ral 1003-Signal Yellow - 1100ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K Polyurethane Texture Paint is designed for professionals seeking a durable, semi-gloss textured finish for industrial applications like machinery, tools, and steel structures. Its key benefit is the ability to hide surface defects while providing robust protection against impact, UV, weather, and chemicals. A potential caveat is the requirement for proper application techniques, typically with spray equipment.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | FT-PU300-P0.76L-H0.19L-T0.15L-S-CV |
| Brand | FabioT. |
| Container Volume | 1100ml |
Extended Product Information
FAQs
What is the shelf life of the mixed product?
Once mixed, the 2K polyurethane paint has a limited pot life and should be used within the recommended time frame specified on the product's technical data sheet, typically a few hours.
Can this paint be applied with a brush or roller?
While primarily designed for spray application, achieving the intended textured finish and optimal performance with a brush or roller can be challenging. It is recommended to use spray equipment for best results.
How should I clean up my equipment after use?
Clean spray guns, hoses, and other application equipment immediately after use with a suitable solvent or thinner recommended for polyurethane coatings.
What is the recommended application temperature?
Refer to the product's technical data sheet for specific temperature and humidity guidelines, but generally, application is best between 10°C and 30°C (50°F and 86°F).
How many coats are typically required?
The number of coats depends on the desired finish and the substrate. Usually, one or two coats are sufficient, applied at the recommended film thickness.
Does this paint require a primer?
For optimal adhesion and durability, especially on bare metal, applying a compatible primer is highly recommended. Consult the product's technical data sheet for specific primer recommendations.
Troubleshooting
Paint not curing properly
Ensure the correct ratio of paint, hardener, and thinner was used. Verify that the components were mixed thoroughly and that environmental conditions (temperature, humidity) are within the recommended range for curing.
Uneven or rough texture
Check spray gun settings (pressure, nozzle size) and application distance. Ensure the paint was mixed to a uniform consistency and applied at the recommended film thickness. Stirring the paint frequently during application may also help.
Poor adhesion to surface
Verify that the surface was properly prepared, cleaned, and free of grease, oil, or rust. Ensure the correct primer was used if necessary, and that the paint was applied to a dry surface.
Surface defects showing through
Ensure the substrate was adequately prepared before painting. For significant defects, a primer or filler might be necessary. Apply multiple thin coats rather than one thick coat.
Pros and Cons
Pros
- Creates a durable and professional-looking textured finish.
- Offers excellent resistance to impact, UV, weather, chemicals, and solvents.
- Hides minor surface defects effectively.
- Provides strong adhesion to metal surfaces.
- Suitable for a wide range of industrial and commercial applications.
Cons
- Requires specific application methods, often involving spray equipment.
- As a 2K system, it involves mixing components, which needs careful attention.
- The semi-gloss finish might not be suitable for all aesthetic preferences.
Setup, Compatibility & Care
Setup: This product is a 2K (two-component) system. It requires precise mixing of the paint, hardener, and thinner in the specified ratios (0.76 L Paint, 0.19 L Hardener, 0.15 L Thinner for the 1.10 L kit) before application. Ensure adequate ventilation during mixing and application.
Compatibility: The paint is designed for metal surfaces, including industrial machinery, components, lockers, tools, and steel structures. It is best applied over properly prepared and primed metal.
Application: For best results, use spray gun or airless spraying equipment. Achieve a smooth, uniform finish by maintaining consistent application technique.
Care: Clean application tools immediately after use with appropriate thinners. For the coated surface, routine cleaning with mild detergents and water is recommended. Avoid abrasive cleaners or solvents that could compromise the finish.