Ft Paints Texture Paint - 1100ml - Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K Polyurethane Texture Paint is a semi-gloss, textured topcoat ideal for professionals and DIY enthusiasts looking to protect and enhance industrial machinery, components, tools, and steel structures. Its primary benefit is a durable, impact-resistant finish that effectively hides surface imperfections, offering a professional appearance. A key consideration is its 2K (two-component) nature, requiring proper mixing of paint, hardener, and thinner.
All features
| Colour | Red |
|---|---|
| Model Part Number | FT-PU300-P0.76L-H0.19L-T0.15L-S-CV |
| Brand | FabioT. |
| Container Volume | 1100ml |
Extended Product Information
FAQs
What is a 2K polyurethane paint?
A 2K (two-component) paint requires mixing a base (paint) with a curing agent (hardener) before application. This creates a chemical reaction that results in a much harder, more durable, and chemically resistant finish compared to 1K paints.
How long is the pot life after mixing?
The pot life varies depending on temperature and the specific mix ratio. Always refer to the product's technical data sheet for the precise pot life, but typically it ranges from a few hours. Mix only what you can use within this time.
Can this paint be applied with a brush?
While designed for spray gun and airless equipment, brushing might be possible for small touch-ups, though it may affect the uniform textured finish. Consult the manufacturer's guidelines for recommended application methods.
What surface preparation is needed?
Surfaces must be clean, dry, and free of grease, oil, rust, and old, peeling paint. For bare metal, a primer designed for polyurethane coatings is highly recommended for optimal adhesion and corrosion protection.
Is this paint suitable for automotive exterior bodywork?
This paint is designed for industrial machinery, components, and structures. While it offers durability, it may not meet the specific aesthetic requirements or flexibility needed for automotive OEM finishes. It is suitable for commercial vehicles' non-bodywork components.
How should I store the unmixed components?
Store unmixed paint and hardener in their original, tightly sealed containers in a cool, dry place away from direct sunlight and extreme temperatures. Do not mix until ready for application.
What safety precautions should I take?
Always use in a well-ventilated area. Wear appropriate personal protective equipment (PPE), including a respirator rated for organic vapors, chemical-resistant gloves, and eye protection, as 2K paints contain isocyanates.
Troubleshooting
Paint not curing or remains soft
Ensure the hardener was mixed in the correct ratio and fully incorporated. Check that the ambient temperature is within the recommended application range and that the pot life was not exceeded before application.
Poor adhesion to the surface
Verify that the substrate was properly prepared: clean, dry, and free from contaminants. Check if an appropriate primer was used, especially on bare metal.
Uneven texture or application marks
Adjust spray gun settings (pressure, nozzle size) or application technique. Ensure the paint mixture has the correct viscosity, adding the recommended thinner if necessary. Apply in consistent, even coats.
Runs or sags in the finish
The paint mixture may be too thin, or coats may be applied too heavily. Reduce the amount of thinner or apply thinner coats. Maintain consistent gun speed and distance.
Pros and Cons
Pros
- Provides excellent protection against impact, chemicals, and weathering.
- Hides surface imperfections effectively due to its textured finish.
- Offers long-lasting durability for industrial applications.
- Suitable for both spray gun and airless application methods.
- Professional semi-gloss textured appearance.
Cons
- Requires mixing of two components (paint and hardener), increasing complexity.
- May require specific ventilation and safety precautions due to its formulation.
- Not suitable for all substrates without proper priming.
- The 1100ml kit size might be insufficient for very large projects.
Setup, Compatibility & Care
Setup:
This is a 2K (two-component) system. The 1100ml kit contains approximately 0.76L of paint, 0.19L of hardener, and 0.15L of thinner. It is crucial to mix the paint and hardener in the correct ratio as specified by the manufacturer (refer to product documentation for exact ratios). Once mixed, a pot life is established, meaning the mixture must be used within a specific timeframe before it begins to cure in the container. Add the thinner if needed for desired application viscosity.
Compatibility:
Primarily designed for metal surfaces such as industrial machinery, components, lockers, tools, and steel structures. Ensure surfaces are clean, dry, and free from grease, oil, and rust before application. A suitable primer may be necessary depending on the substrate and desired performance.
Care:
To maintain the finish, clean surfaces with mild soap and water. Avoid abrasive cleaners or solvents that could degrade the coating. For industrial settings, regular inspection for damage or wear is recommended, with touch-ups applied as needed following the proper mixing and application procedures.