Ft Paints Texture Paint With Semi Gloss Finish For Commercial Vehicles - 20000ml - Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 20L kit of FabioT. RT 2K Polyurethane Texture Paint is designed for professionals and DIY enthusiasts needing a durable, semi-gloss textured finish for industrial machinery, tools, lockers, and steel structures. Its key benefit is providing a tough, defect-hiding protective layer with excellent resistance to UV, weather, chemicals, and solvents. A potential caveat is the need for proper ventilation and personal protective equipment due to its industrial-grade formulation. Key features include a 2K polyurethane-acrylic base, impact resistance, and high adhesion for a lasting, professional look.
All features
| Colour | Red |
|---|---|
| Model Part Number | FT-PU300-P13.8L-H3.4L-T2.8L-S-CV |
| Brand | FabioT. |
| Container Volume | 20000ml |
Extended Product Information
FAQs
What is the coverage rate of the 20L kit?
Coverage rates can vary depending on application method and surface porosity. Refer to the product's technical data sheet for specific coverage estimates.
How long is the pot life after mixing?
The pot life (working time) of mixed 2K paint is limited. Consult the product's technical data sheet for the specific pot life of this formulation.
Can this paint be applied with a brush or roller?
While designed for spray application, some textured finishes can be applied with specific rollers or brushes. However, achieving a uniform texture may be challenging. Always test on a small area first.
What surface preparation is required?
Surfaces must be clean, dry, and free from rust, grease, oil, and other contaminants. Light abrasion or priming may be necessary depending on the substrate.
What is the drying time?
Drying and curing times depend on temperature, humidity, and film thickness. Refer to the technical data sheet for specific drying schedules (touch dry, recoat time, full cure).
Is this product suitable for automotive use?
While designed for industrial machinery and vehicles, its specific use on automotive exteriors may depend on desired finish and regulatory requirements. It is ideal for components and structural parts.
How should I store the unmixed components?
Store unmixed components in a cool, dry place, away from direct sunlight and sources of ignition. Ensure containers are tightly sealed.
Troubleshooting
Paint not curing or hardening properly
Verify that the correct hardener was used and mixed in the precise ratio. Ensure the correct thinner was used and that the ambient temperature is within the recommended range for application and curing.
Uneven texture or coverage
Adjust spray gun settings (pressure, fan pattern, fluid tip). Ensure proper technique, maintaining a consistent distance and speed during application. Check for blockages in the spray equipment.
Poor adhesion to the surface
Ensure the surface was thoroughly cleaned, degreased, and properly prepared (e.g., sanded or primed if necessary). Re-check for any contaminants like oil or dust before recoating.
Runs or sags in the finish
Apply the paint in thinner coats. Reduce the amount of paint applied per coat. Ensure the correct thinner is used for the temperature and application method. Avoid over-thinning.
Pros and Cons
Pros
- Provides a durable, defect-hiding textured finish.
- Excellent resistance to UV, weather, chemicals, and solvents.
- Impact and wear-resistant for longevity.
- High adhesion ensures strong bonding to metal surfaces.
- Suitable for various industrial and commercial applications.
Cons
- Requires proper ventilation and personal protective equipment.
- Two-component system (paint, hardener, thinner) requires precise mixing.
- Drying times may vary based on temperature and humidity.
- May require specialized application equipment for best results.
- Not intended for consumer interior decorative use.
Setup, Compatibility & Care
Setup:
This product is a 2K system, meaning it requires mixing the paint, hardener, and thinner in the correct proportions before application. Always refer to the product's technical data sheet for specific mixing ratios and induction times. Ensure the application area is well-ventilated and wear appropriate personal protective equipment (PPE), including a respirator, gloves, and eye protection.
Compatibility:
This paint is designed for direct application to properly prepared ferrous and non-ferrous metal surfaces. It is ideal for industrial machinery, components, lockers, tools, and steel structures. Ensure surfaces are clean, dry, and free from grease, oil, or rust before application. It is not recommended for use on plastics or wood without appropriate priming.
Care:
To maintain the finish, clean surfaces periodically with mild soap and water. Avoid using abrasive cleaners or solvents that could damage the coating. For any accidental spills or heavy soiling, clean the area promptly. The durable nature of the polyurethane-acrylic formula means minimal ongoing maintenance is typically required.