Ft Paints Texture Paint For Commercial Vehicles - Graphite Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and DIY enthusiasts working on industrial machinery, components, tools, and steel structures. The FabioT. RT 2K Polyurethane Texture Paint provides a durable, semi-gloss textured finish that effectively hides surface imperfections while offering superior protection. A key caveat is that this is a professional-grade 2K system, requiring proper ventilation and safety equipment during application.
All features
| Colour | Black |
|---|---|
| Model Part Number | FT-PU300-P13.8L-H3.4L-T2.8L-M-CV |
| Brand | FabioT. |
| Container Volume | 20000 |
Extended Product Information
FAQs
What is a 2K Polyurethane-Acrylic topcoat?
A 2K (two-component) coating requires mixing two separate parts – the base paint and a hardener – before application. This chemical reaction creates a highly durable, resistant, and long-lasting finish compared to single-component paints.
What types of surfaces can this paint be used on?
It is specifically designed for metal surfaces, including industrial machinery, components, tools, lockers, and steel structures. Proper surface preparation is crucial for optimal adhesion.
How should I prepare the surface before applying the paint?
Ensure the surface is clean, dry, and free from grease, oil, and contaminants. Depending on the material and its condition, you may need to sand or apply a suitable primer for best results.
What safety precautions are necessary when using this paint?
Always use in a well-ventilated area. Wear appropriate personal protective equipment (PPE) including a respirator approved for organic vapors, chemical-resistant gloves, and eye protection. Refer to the Safety Data Sheet (SDS) for detailed safety information.
Can this paint be applied with a brush or roller?
While it is designed for spray application (spray gun or airless equipment) for best results and texture, some users may achieve satisfactory results with specific brushes or rollers for smaller areas. However, spray application is recommended for a uniform textured finish.
What is the coverage rate of the paint?
Coverage varies based on application method, surface porosity, and desired film thickness. Consult the product's technical data sheet for specific coverage estimates.
How long does the mixed paint last (pot life)?
The pot life of the mixed paint depends on the temperature and is typically specified by the manufacturer. Once mixed, it should be used within this limited time frame before it begins to cure in the container.
Troubleshooting
Paint not curing properly
Ensure the correct ratio of paint to hardener was used and that mixing was thorough. Verify ambient temperature and humidity are within the recommended application range. Re-check the pot life after mixing and ensure application occurred within this window.
Poor adhesion to surface
Confirm the surface was properly prepared (cleaned, degreased, and possibly abraded). Ensure the correct primer was used if required for the substrate. Check that the paint was applied within its recoat window if multiple coats are needed.
Uneven texture or finish
Adjust spray gun settings (pressure, nozzle size, flow rate) and maintain a consistent distance from the surface during application. Ensure proper thinning if required and that the paint was mixed uniformly.
Runs or sags in the coating
Reduce the amount of paint applied per coat, increase the distance between the spray gun and the surface, or slow down the application speed. Ensure the paint is not over-thinned.
Pros and Cons
Pros
- Provides a tough, impact-resistant finish suitable for industrial use.
- Excellent resistance to UV, weather, chemicals, and solvents.
- Hides surface imperfections effectively due to its textured finish.
- Offers good adhesion and flow for professional application.
- Available in convenient kit bundles for various project sizes.
Cons
- Requires proper safety equipment and ventilation due to its 2K formulation.
- Application may require specific spraying equipment for best results.
- Curing times and conditions need to be carefully managed for optimal performance.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) system, meaning the paint must be mixed with a hardener and potentially a thinner according to the manufacturer's specified ratios. Ensure thorough mixing for optimal performance. It is recommended to use spray gun or airless application equipment for best results. Always apply in a well-ventilated area and wear appropriate personal protective equipment (PPE), including a respirator, gloves, and eye protection.
Compatibility: The paint is designed for metal surfaces, including industrial machinery, components, tools, lockers, and steel structures. Ensure surfaces are clean, dry, and free from grease, oil, and old coatings before application. Proper surface preparation, such as priming or sanding, may be necessary depending on the substrate and its condition.
Care: To maintain the finish, clean surfaces with mild detergents and water. Avoid using abrasive cleaners or solvents that could damage the coating. The paint is designed for long-term durability, but regular visual inspection for any signs of wear or damage is recommended.