Ft Paints - 1100ml - Grey

A 2K (two-component) paint requires mixing a base component with a hardener to initiate a chemical curing process. This results in a much harder, more durable, and chemically resistant finish compared to standard 1K paints.

This paint is designed for spray application using standard spray guns or airless spray equipment for best results and uniform coverage.

Once mixed, 2K paints have a limited pot life. The exact duration depends on the temperature, but it is typically a few hours. It's best to mix only what you can use within the specified pot life.

This paint is specifically formulated for metal surfaces. It may not adhere properly or perform as expected on wood or plastic without appropriate primers.

Always use in a well-ventilated area, wear appropriate personal protective equipment including gloves, eye protection, and a respirator suitable for organic vapors. Refer to the product's safety data sheet for detailed information.

The paint provides a semi-gloss, satin matt textured finish that is both decorative and functional, helping to hide surface imperfections.

Clean spray equipment immediately after use with a suitable solvent recommended by the paint manufacturer.

Ensure the paint and hardener were mixed in the correct ratio and that the ambient temperature is within the recommended application range. Insufficient mixing or incorrect temperature can inhibit curing.

Verify that the metal substrate was properly prepared, cleaned, and degreased before application. Any residual oil, dirt, or rust will prevent proper adhesion.

Check spray gun settings, including pressure and nozzle size, and maintain a consistent spray pattern. Ensure the paint mixture is adequately thinned if necessary for your application method.

While the textured finish helps hide minor defects, significant imperfections may require additional surface preparation, such as sanding or filling, before painting.