Ft Paints 1.10L Kit Texture Paint With Semi Gloss Finish For Commercial Vehicles - Ral 7042-Traffic Grey A
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and DIY enthusiasts working with industrial machinery, components, tools, and steel structures. The FT Paints RT 2K Polyurethane Texture Paint offers a durable, semi-gloss textured finish that effectively hides surface imperfections and provides robust protection. A key consideration is its 2K (two-component) nature, requiring proper mixing of paint, hardener, and thinner for optimal performance.
All features
| Colour | Grey |
|---|---|
| Model Part Number | FT-PU300-P0.76L-H0.19L-T0.15L-S-CV |
| Brand | FabioT. |
| Container Volume | 1100 |
Extended Product Information
FAQs
What is the shelf life of the mixed paint?
Once mixed, the pot life of 2K polyurethane paints is limited, typically between 2-4 hours depending on temperature. Use the mixed product within this window.
Can this paint be applied with a brush?
While designed for spray application (spray gun or airless), brush application may be possible for small areas. However, achieving a uniform textured finish can be challenging, and testing on a small area is recommended.
What kind of safety precautions should I take?
Always use in a well-ventilated area. Wear appropriate personal protective equipment, including a respirator rated for organic vapors, chemical-resistant gloves, and eye protection.
How long does it take to dry and cure?
Drying and curing times vary based on temperature, humidity, and film thickness. It is typically touch-dry within a few hours and fully cured within 24-72 hours, but refer to the product's technical data sheet for precise timings.
What is the coverage rate?
Coverage rates depend on the application method and surface porosity. Generally, one liter of mixed product can cover approximately 8-10 square meters at the recommended film thickness. Refer to the technical data sheet for exact figures.
Does this product come in other colors?
Yes, FT Paints offers this texture paint in various colors and finishes, including Satin Matt and Semi-Gloss. Check the product catalog or manufacturer's website for available options.
Troubleshooting
Paint not curing or remaining soft
Verify the correct ratio of paint to hardener was used. Ensure both components were thoroughly mixed. Check for extreme temperature or humidity during application and curing.
Poor adhesion to the surface
The surface may not have been properly prepared. Ensure it was clean, dry, and free of grease or rust. A compatible primer might be necessary for the substrate.
Uneven texture or poor finish quality
Adjust spray gun pressure, nozzle size, and application distance. Ensure consistent application speed and overlap. Re-check paint viscosity after thinning.
Bubbling or blistering during application
This could be due to moisture on the surface, incorrect thinning, or excessive spray gun pressure. Ensure the surface is dry and adjust application technique.
Pros and Cons
Pros
- Hides surface imperfections effectively with its textured finish.
- Provides excellent resistance to impacts, chemicals, solvents, UV, and weather.
- Offers strong adhesion and a smooth, uniform application.
- Suitable for a wide range of industrial and commercial applications.
- Durable and long-lasting protection for machinery and structures.
Cons
- Requires careful mixing of two components (paint and hardener) plus thinner.
- May require specialized spray equipment for best results.
- Not intended for amateur or light-duty decorative use where extreme durability isn't paramount.
- Proper ventilation and personal protective equipment are essential due to its chemical nature.
- Learning curve for achieving consistent texture, especially for inexperienced users.
Setup, Compatibility & Care
Setup:
This is a 2K product, meaning it requires mixing:
- Ensure the paint, hardener, and thinner are at the recommended temperature, typically around 20°C (68°F).
- Carefully measure and mix the paint and hardener according to the manufacturer's specified ratio. This kit includes 0.76 L of Paint, 0.19 L of Hardener, and 0.15 L of Thinner.
- Thoroughly mix the components until a homogeneous mixture is achieved. Avoid over-mixing, which can introduce air.
- Add the specified amount of thinner if required for desired viscosity, and mix again.
- Allow the mixed product to 'induct' or 'sweat' for the time specified by the manufacturer (often 10-15 minutes) before application.
Compatibility:
- Primarily designed for application on metal surfaces like industrial machinery, components, lockers, tools, and steel structures.
- Ensure surfaces are clean, dry, and free from grease, oil, or contaminants. A suitable primer may be necessary for optimal adhesion on certain substrates.
Care:
- Clean application equipment immediately after use with an appropriate solvent.
- For the coated surface, clean with mild soap and water. Avoid abrasive cleaners or harsh solvents that could damage the finish.
- Regularly inspect for any damage and touch up as needed following the application guidelines.