Ft Paints Texture Paint - 100ml - Grey - Satin Matt
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 100ml Grey RT 2K Polyurethane Texture Paint is designed for professionals seeking a durable, satin matt finish for industrial machinery, tools, and steel structures. Its key benefit is providing a tough, impact-resistant, and weather-resilient coating that effectively hides surface imperfections. A potential caveat is the 2K formulation, which requires careful mixing and handling due to its chemical components. This paint offers excellent adhesion, chemical resistance, and a professional decorative appearance.
All features
| Colour | Grey |
|---|---|
| Model Part Number | FT-PU300-100SAM-M-CV |
| Brand | FabioT. |
| Container Volume | 100ml |
Extended Product Information
FAQs
What is the typical finish of this paint?
This paint provides a durable satin matt textured finish.
What surfaces is this paint suitable for?
It is engineered for industrial machinery, components, tools, lockers, and steel structures.
Does this paint require a primer?
Surface preparation is key; a primer may be required depending on the specific substrate and its condition. Always refer to the manufacturer's detailed instructions.
How do I mix the 2K components?
Refer to the product's technical data sheet for the exact mixing ratio and procedure for the base and activator. Proper mixing is crucial for performance.
Is this paint suitable for outdoor use?
Yes, it is UV and weather resistant, making it reliable for outdoor durability.
What safety precautions should I take when using this paint?
Ensure adequate ventilation, wear appropriate personal protective equipment (gloves, eye protection, respirator), and follow all safety guidelines outlined in the product's safety data sheet.
Can I use this paint for automotive applications?
While formulated for industrial uses, its durable properties may lend themselves to certain commercial vehicle applications as indicated in the product description.
Troubleshooting
Paint not curing properly
Ensure the correct mixing ratio of base and activator was used. Check if the temperature is within the recommended application range and if the product has expired.
Poor adhesion to surface
Verify that the surface was adequately prepared, cleaned, and free from contaminants. Ensure the surface was properly primed if required.
Uneven or rough texture
Adjust spray gun settings (pressure, nozzle size) and maintain consistent application distance. Ensure proper thinning if necessary and check for blockages in application equipment.
Runs or drips
Apply thinner, more even coats. Avoid over-application and ensure the correct viscosity and application temperature are maintained.
Pros and Cons
Pros
- Provides a highly durable and protective finish.
- Excellent resistance to impacts, chemicals, UV, and weathering.
- Hides surface imperfections for a professional aesthetic.
- Suitable for a wide range of industrial applications.
- Good adhesion to metal substrates.
Cons
- Requires careful handling due to its 2K formulation.
- Sample size (100ml) may be insufficient for larger projects.
- May require specialized application equipment (spray gun/airless).
- Proper ventilation and personal protective equipment are essential during application.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) product. It requires proper mixing of the base and activator according to the manufacturer's instructions before application. Ensure the surface is clean, dry, and free from contaminants like grease or dust. Recommended application methods include spray gun or airless equipment.
Compatibility: Primarily designed for metal surfaces, including industrial machinery, components, tools, lockers, and steel structures. It is formulated as a topcoat.
Care: Clean application tools immediately after use with appropriate solvents as recommended by the manufacturer. For the coated surface, routine cleaning with mild detergents and water is generally sufficient. Avoid abrasive cleaners or harsh chemicals that could compromise the finish.