FabioT. 2K Polyurethane Texture Paint - 5500ml - Moss Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This FabioT. 2K Polyurethane Texture Paint is designed for professionals and DIY enthusiasts needing a durable, semi-gloss textured finish for industrial machinery, tools, lockers, and steel structures. Its key benefit is providing a protective, defect-hiding coating with excellent resistance to impact, UV, weather, chemicals, and solvents. A potential caveat is the need for proper ventilation and personal protective equipment due to its 2K formulation.
All features
| Colour | Green |
|---|---|
| Model Part Number | FT-PU300-P3.81L-H0.95L-T0.74L-S-CV |
| Brand | FabioT. |
| Container Volume | 5500ml |
Extended Product Information
FAQs
What is a 2K Polyurethane paint?
A 2K (two-component) paint requires mixing a base component with a hardener before application. This chemical reaction creates a much stronger, more durable, and resistant coating than single-component paints.
What is the coverage rate of this paint?
Coverage rates vary based on application thickness and surface porosity. Refer to the product's technical data sheet for specific coverage estimates.
Can this paint be applied with a brush?
While primarily designed for spray application, brushing might be possible for small areas or touch-ups. However, achieving a uniform textured finish with a brush is challenging and not recommended for the best aesthetic and protective results.
How long does the mixed paint last before it becomes unusable?
Once mixed with the hardener, the paint has a limited pot life, typically ranging from a few hours to a day, depending on temperature. Unused mixed paint should be discarded.
What safety precautions should I take when using this product?
Always use in a well-ventilated area. Wear appropriate personal protective equipment, including a respirator suitable for organic vapors, chemical-resistant gloves, and eye protection.
Can I apply this paint outdoors?
Yes, this paint is UV and weather resistant, making it suitable for outdoor applications on prepared metal surfaces.
How do I clean my spray equipment after use?
Clean spray equipment immediately after use with a suitable solvent recommended for polyurethane paints to prevent the product from curing in the lines and gun.
Troubleshooting
Paint not adhering properly
Ensure the surface was thoroughly cleaned, degreased, and properly prepared (e.g., lightly abraded if necessary). Verify the correct hardener and thinner were used and mixed in the correct ratio.
Uneven or poor texture finish
Check spray equipment settings (pressure, nozzle size) and application technique. Ensure the paint was mixed thoroughly and allowed proper induction time. Surface preparation is also critical.
Coating remains tacky after application
This could be due to incorrect mixing ratios, insufficient hardener, low ambient temperature, high humidity, or applying too thick a coat. Ensure application conditions meet manufacturer recommendations.
Bubbling or pinholing
Ensure proper ventilation during application to allow solvents to escape. Check for moisture or oil contamination on the substrate. Avoid applying in excessively humid conditions.
Pros and Cons
Pros
- Provides a robust, textured finish that hides imperfections.
- Excellent resistance to impact, UV, weather, chemicals, and solvents.
- Durable coating suitable for demanding industrial environments.
- High adhesion ensures a long-lasting bond to metal surfaces.
- Versatile application methods accommodate different professional needs.
Cons
- Requires proper ventilation and personal protective equipment due to 2K formulation.
- Application may require specific spraying equipment for best results.
- Not suitable for porous surfaces without proper priming.
- Longer drying times may be expected in humid conditions.
- Requires mixing of paint, hardener, and thinner in specific ratios.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the surface is clean, dry, and free from grease, oil, and contaminants. A thorough degreasing and potential sanding may be necessary.
- Mix the 2K Polyurethane Texture Paint with the appropriate FabioT. Hardener and Thinner in the recommended ratio (refer to product label for precise mix ratios). Mix thoroughly for 2-3 minutes.
- Allow the mixed product to 'induction' or 'sweat-in' for the time specified by the manufacturer (typically 15-30 minutes) before application.
- Apply using a spray gun or airless spraying equipment. Ensure consistent application for an even textured finish.
Compatibility:
- Primarily designed for direct application onto properly prepared metal surfaces, including steel, iron, and aluminum.
- Can be applied over existing, compatible primers or industrial coatings.
- Not recommended for use on plastics or flexible substrates unless specifically formulated primers are used.
Care:
- Clean spills immediately with appropriate solvent before the paint cures.
- For finished surfaces, cleaning can be done with mild detergents and water. Avoid abrasive cleaners or harsh solvents that could damage the coating.
- For best longevity, inspect surfaces periodically for any signs of damage and touch up as needed following the initial application steps.