Ft Paints Texture Paint With Satin Matt Finish For Commercial Vehicles - 5500ml - Yellow
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and DIY enthusiasts working on industrial machinery, components, lockers, tools, and steel structures. The FabioT. RT 2K Polyurethane Texture Paint offers a durable, semi-gloss textured finish that effectively conceals surface imperfections while providing robust protection. A key caveat is its 2K formulation, requiring careful mixing of paint, hardener, and thinner for optimal results and safety.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | FT-PU300-P3.81L-H0.95L-T0.74L-M-CV |
| Brand | FabioT. |
| Container Volume | 5500ml |
Extended Product Information
FAQs
What is a 2K Polyurethane paint?
A 2K paint system consists of two components: the base paint and a separate hardener (or catalyst). These must be mixed together immediately before use. This chemical reaction creates a highly durable, cross-linked coating.
How do I mix the paint, hardener, and thinner?
Always refer to the product's technical data sheet for the exact mixing ratios. Typically, you will mix a specific volume of paint with a specific volume of hardener, and then add thinner to adjust viscosity for application.
What safety precautions are needed when using this paint?
Due to the nature of 2K polyurethane systems, it is crucial to work in a well-ventilated area, wear appropriate personal protective equipment (PPE) including a respirator with organic vapor cartridges, gloves, and eye protection. Consult the Safety Data Sheet (SDS) for detailed information.
Can I apply this paint with a brush or roller?
While primarily designed for spray application (spray gun or airless), some 2K polyurethane paints can be applied with brushes or rollers if the viscosity is adjusted correctly with thinner. However, achieving a uniform textured finish may be more challenging. Refer to the product's technical data sheet for recommendations.
What is the shelf life of the mixed product?
Once mixed, the 2K paint has a limited pot life, meaning it must be used within a specific timeframe (e.g., a few hours) before it becomes unusable. The shelf life of the unmixed components is typically much longer, as stated on the product packaging.
How long does it take to dry and cure?
Drying and curing times vary based on temperature, humidity, and film thickness. The paint will typically be dry to the touch within a few hours, but full cure (maximum hardness and chemical resistance) can take several days.
What substrates can this paint be used on?
It is ideal for metal surfaces including industrial machinery, components, lockers, tools, and steel structures. Proper surface preparation and priming are essential for optimal performance on any substrate.
Troubleshooting
Uneven texture or finish
Ensure proper mixing ratios and adequate induction time. Check spray gun settings (air pressure, nozzle size) and maintain consistent application distance and speed.
Poor adhesion to substrate
Verify that the surface was properly prepared (cleaned, degreased, and primed if necessary) and is completely dry before application. Ensure the correct primer was used for the substrate type.
Coating is too soft or tacky after drying
Check the paint-to-hardener ratio. Insufficient hardener will prevent proper curing. Ensure application occurs within the recommended temperature and humidity range.
Runs or drips during application
Reduce the amount of thinner used, lower the spray pressure, or increase the application speed. Ensure consistent movement of the spray gun.
Pros and Cons
Pros
- Provides a tough, impact-resistant finish ideal for heavy-duty applications.
- Excellent resistance to UV, weather, chemicals, and solvents.
- The textured finish effectively hides surface imperfections.
- Offers good adhesion and a smooth, professional appearance.
- Suitable for a wide range of industrial and commercial substrates.
Cons
- Requires precise mixing of three components (paint, hardener, thinner), increasing complexity.
- 2K systems often require specific safety precautions due to isocyanates.
- May require specialized spray equipment for optimal application.
- Not suitable for applications where extreme flexibility is needed.
- Drying times can be temperature-dependent and require specific conditions.
Setup, Compatibility & Care
Setup:
This is a 2K (two-component) system. It requires the correct ratio of paint, hardener, and thinner. Always refer to the product's technical data sheet for the precise mixing ratios. Mix thoroughly until a homogeneous blend is achieved. Allow for the recommended induction/sweat-in time before application, if specified.
Compatibility:
Primarily designed for metal surfaces, including industrial machinery, components, lockers, tools, and steel structures. It is recommended to use an appropriate primer for optimal adhesion and corrosion resistance, especially on bare metal. Ensure surfaces are clean, dry, and free from contaminants before application.
Care:
Clean application tools immediately after use with a suitable solvent. For the coated surface, clean using mild detergents and water. Avoid abrasive cleaners or solvents that could damage the finish. Due to its durable nature, the coated surface generally requires minimal maintenance.