Ft Paints Texture Paint With Semi Gloss Finish For Commercial Vehicles - Yellow - 5500ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K Polyurethane Texture Paint is a robust semi-gloss, textured topcoat designed for professionals seeking durable and aesthetically pleasing finishes on industrial machinery, tools, lockers, and steel structures. Its key benefit is a tough, defect-hiding coating that offers excellent resistance to impact, UV, weather, chemicals, and solvents, ensuring long-lasting protection and a premium look. A potential caveat is the need for proper application equipment and ventilation due to its 2K polyurethane-acrylic formulation.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | FT-PU300-P3.81L-H0.95L-T0.74L-S-CV |
| Brand | FabioT. |
| Container Volume | 5500 |
Extended Product Information
FAQs
What is a 2K polyurethane paint?
A 2K (two-component) paint system requires mixing two separate parts – the base paint and a catalyst (hardener) – before application. This chemical reaction creates a much harder, more durable, and chemically resistant finish compared to single-component paints.
What surfaces is this paint suitable for?
This paint is specifically designed for metal surfaces, including industrial machinery, components, tools, lockers, and steel structures. Proper surface preparation and priming are essential for optimal adhesion.
Do I need special equipment to apply this paint?
Yes, due to its formulation, it is best applied using professional spray equipment such as a spray gun or airless sprayer. Proper ventilation is also required during application.
How long does it take to dry and cure?
Drying and curing times depend on factors like temperature, humidity, and film thickness. Refer to the product's technical data sheet for specific recommendations, but typically it will be touch-dry in a few hours and fully cured within days.
Can I use this paint outdoors?
Yes, the paint is UV and weather resistant, making it suitable for outdoor applications on steel structures and equipment that are exposed to the elements.
What is the benefit of the textured finish?
The textured finish not only provides a decorative semi-gloss appearance but also effectively hides minor surface imperfections, providing a uniform look without requiring extensive surface smoothing.
How should I clean the painted surface?
Once fully cured, the surface can be cleaned with mild detergents and water. Avoid using harsh abrasive cleaners or strong solvents that could damage the coating.
Troubleshooting
Uneven texture or poor finish
Ensure correct mixing ratios of paint, hardener, and thinner. Check spray gun settings (pressure, nozzle size) and maintain consistent application distance. Ensure the surface is properly prepared.
Coating not curing or drying properly
Verify that the correct hardener was used and mixed in the proper ratio. Check ambient temperature and humidity; application outside recommended ranges can affect cure times. Ensure components were mixed thoroughly.
Poor adhesion to the substrate
Surface preparation is key. Ensure the metal surface is thoroughly cleaned, degreased, and free from rust or scale. Use an appropriate primer if required for the specific metal type.
Excessive runs or drips
Reduce spray pressure or apply thinner coats. Increase application speed or distance from the surface. Ensure proper thinning is achieved for desired viscosity.
Pros and Cons
Pros
- Hides surface defects effectively with its textured finish.
- Offers excellent resistance to impact, UV, weather, chemicals, and solvents.
- Provides durable, long-lasting protection for industrial applications.
- Achieves a professional, decorative semi-gloss appearance.
- Good adhesion and flow for smooth, uniform application.
Cons
- Requires specific application equipment (spray gun, airless equipment).
- Needs proper ventilation during application due to its formulation.
- May require mixing with a hardener and thinner, adding a step to the process.
- Semi-gloss finish might not be suitable for all aesthetic preferences.
- Typically intended for professional or industrial use, not general DIY.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) system requiring mixing of the paint, hardener, and thinner in specific ratios as per manufacturer guidelines before application. Ensure all components are at the recommended temperature for optimal results.
Application: Best applied using spray gun or airless spray equipment. Proper ventilation is crucial during application. Ensure surfaces are clean, dry, and free from grease, oil, and other contaminants before application. Adhesion promoters may be necessary on certain substrates.
Compatibility: Formulated for use on metal surfaces including industrial machinery, components, lockers, tools, and steel structures. It is not recommended for use on plastics or flexible materials without proper priming.
Care: Once cured, the coating is durable and resistant to chemicals and solvents. Cleaning can typically be done with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the finish.