Ft Paints Texture Paint For Commercial Vehicles - 5500ml - Jet Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K Polyurethane Texture Paint is designed for professionals seeking a highly durable and aesthetically pleasing finish for industrial applications like machinery, tools, and steel structures. Its key benefit is a resilient, semi-gloss textured coating that effectively conceals surface imperfections while providing robust protection against environmental and mechanical damage. A potential caveat is the need for specific application equipment and proper ventilation due to its 2K formulation.
All features
| Colour | Black |
|---|---|
| Model Part Number | FT-PU300-P3.81L-H0.95L-T0.74L-M-CV |
| Brand | FabioT. |
| Container Volume | 5500 |
Extended Product Information
FAQs
What is a 2K polyurethane paint?
A 2K (two-component) paint requires mixing a base (paint) with a catalyst (hardener) before application. This creates a chemical reaction that results in a much harder, more durable, and chemically resistant finish compared to single-component paints.
How long does the mixed paint last once combined?
The pot life (working time) of mixed 2K paint is limited and varies by product and temperature. Typically, it ranges from a few hours to half a day. Refer to the product's technical data sheet for specific pot life information.
What kind of equipment is needed for application?
This paint is designed for application with spray equipment such as a conventional spray gun or an airless sprayer. Manual application methods are generally not recommended for achieving a uniform textured finish.
Can I apply this paint over existing paint?
Yes, it can be applied over properly prepared and compatible existing paint finishes. Ensure the old paint is sound and not peeling. Lightly scuffing or sanding the surface can improve adhesion.
What safety precautions should I take?
Always use in a well-ventilated area. Wear appropriate personal protective equipment (PPE), including a respirator suitable for organic vapors, safety glasses, and gloves. Consult the Safety Data Sheet (SDS) for detailed safety information.
How do I clean up my equipment after use?
Clean spray guns and other equipment immediately after use with a suitable solvent recommended for polyurethane coatings. Do not allow the paint to dry in the equipment.
What is the recommended temperature range for application?
The ideal application temperature is typically between 15°C and 25°C (59°F and 77°F). Avoid applying in extreme temperatures, high humidity, or direct sunlight, as this can affect drying and curing.
Troubleshooting
Paint not drying or curing properly
Verify that the hardener was mixed in the correct ratio and that the components were thoroughly combined. Ensure application occurred within the recommended temperature range and that sufficient time has passed for curing.
Poor adhesion to the surface
The surface may not have been adequately prepared. Ensure it was clean, dry, and free of contaminants like oil or grease. Re-sanding and re-degreasing may be necessary.
Uneven or rough texture
This can be due to incorrect spray gun settings (pressure, nozzle size), improper distance from the surface, or inconsistent application technique. Adjust spray settings and maintain a consistent spray pattern.
Runs or sags in the finish
Applying the paint too thickly or at too low a pressure can cause runs. Apply in thin, even coats and allow adequate flash-off time between coats. Increase spray pressure if necessary.
Pinholes or bubbles in the finish
Bubbles can result from trapped air or moisture, or solvent evaporation. Ensure the surface is clean and dry. Use appropriate reducer for the temperature, and allow adequate flash-off time between coats.
Pros and Cons
Pros
- Exceptional durability for industrial environments.
- Hides surface imperfections effectively with a textured finish.
- Excellent resistance to UV, weather, chemicals, and solvents.
- Provides strong impact and wear resistance.
- Good adhesion and smooth application properties.
Cons
- Requires proper ventilation and potentially specialized application equipment (spray gun/airless).
- As a 2K system, it involves mixing components, which requires precision.
- May not be suitable for DIY users without experience in industrial coatings.
- The semi-gloss texture might not suit all aesthetic preferences.
- Requires careful handling and storage due to its chemical composition.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the surface is clean, dry, and free from grease, oil, and dust. Prepare the surface by sanding or degreasing as necessary.
- Mix the paint, hardener, and thinner according to the manufacturer's recommended ratio (typically provided on the product label or technical data sheet). Mix thoroughly to ensure a homogeneous blend.
- Allow the mixture to 'induct' or 'sweat' for the time specified by the manufacturer before application.
Compatibility:
- Primarily designed for bare metal, primed metal, and previously painted surfaces compatible with polyurethane coatings.
- Not recommended for direct application on plastics or wood without an appropriate primer.
- Ensure all application equipment (spray guns, airless sprayers) is clean and suitable for use with 2K coatings.
Care:
- Clean application tools immediately after use with a suitable solvent.
- For the coated surface, clean with mild soap and water. Avoid abrasive cleaners or solvents that could damage the coating.
- Store unused mixed paint in a sealed container in a cool, well-ventilated area. Unmixed components should be stored according to manufacturer guidelines.