Ft Paints Texture Paint With Satin Matt Finish For Commercial Vehicles - 1100ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and DIY enthusiasts working on industrial machinery, components, lockers, tools, and steel structures. The FabioT. RT 2K Polyurethane Texture Paint offers a durable, semi-gloss textured finish that conceals imperfections and provides excellent protection. A key consideration is the need for proper ventilation and personal protective equipment due to its industrial-grade formulation.
All features
| Colour | Grey |
|---|---|
| Model Part Number | FT-PU300-P0.76L-H0.19L-T0.15L-M-CV |
| Brand | FabioT. |
| Container Volume | 1100ml |
Extended Product Information
FAQs
What is the coverage rate of the 1100ml kit?
Coverage varies based on application thickness and surface porosity. Typically, a 1.10 L kit can cover approximately [Please refer to the product's technical data sheet for specific coverage details].
Can this paint be applied with a brush or roller?
This product is primarily designed for spray application (spray gun or airless). While brush or roller application might be possible for small touch-ups, achieving a uniform textured finish comparable to spray application is difficult and not recommended for best results.
What are the safety precautions for using this paint?
Always use in a well-ventilated area. Wear appropriate personal protective equipment (PPE), including a respirator, gloves, and eye protection, as it contains isocyanates and is flammable.
How long does the paint need to cure before handling?
The recoat time and full cure time depend on temperature and humidity. Refer to the product's technical data sheet for specific drying and curing times. Generally, it's touch-dry within a few hours, but full hardness develops over several days.
Is this paint suitable for automotive exteriors?
While designed for industrial machinery and components, its durability and finish make it potentially suitable for some automotive applications where a textured finish is desired. However, it is not a direct replacement for automotive-specific clear coats or finishes.
What is the shelf life of the mixed product?
Once mixed, the pot life (working time) of a 2K polyurethane is limited, typically ranging from a few hours. Unmixed components should be stored in a cool, dry place according to the manufacturer's recommendations.
Can I get this paint in other colors or finishes?
The FabioT. RT 2K Polyurethane Texture Paint is available in various colors and finishes. Please check the product catalog or consult with your supplier for available options, such as the red variant or semi-gloss finish.
Troubleshooting
Uneven texture or finish
Ensure proper mixing of components. Adjust spray gun pressure and distance. Check for blockages in the spray equipment.
Paint not adhering to the surface
Verify the surface was properly cleaned and prepared. Ensure an appropriate primer was used if necessary. Check the product's shelf life and mixing ratios.
Runs or drips during application
Reduce the amount of paint applied in a single coat. Increase the spraying distance or reduce fluid flow. Allow adequate drying time between coats.
Product curing too quickly or too slowly
Ensure correct hardener and thinner ratios are used. Adjust application based on ambient temperature and humidity. Consult the product's technical data sheet for optimal conditions.
Pros and Cons
Pros
- Creates a durable, impact-resistant surface.
- Hides surface imperfections effectively with its textured finish.
- Excellent resistance to UV, weather, chemicals, and solvents.
- Provides strong adhesion and smooth application.
- Suitable for a wide range of industrial and commercial applications.
Cons
- Requires proper ventilation and personal protective equipment (PPE) due to its 2K formulation.
- Application may require specialized equipment (spray gun or airless sprayer).
- Not suitable for all surfaces without proper preparation.
- Curing times may vary depending on environmental conditions.
Setup, Compatibility & Care
Setup:
- Preparation: Ensure the surface to be painted is clean, dry, and free from grease, oil, and loose material. A primer suitable for metal may be required depending on the substrate.
- Mixing: This is a 2K product. Thoroughly mix the paint (0.76 L), hardener (0.19 L), and thinner (0.15 L) in the specified ratio. Mix until a uniform consistency is achieved.
- Application Equipment: Use a spray gun or airless sprayer. Ensure equipment is clean and suitable for use with polyurethane paints.
Compatibility:
- Ideal for ferrous and non-ferrous metals, including steel structures, industrial machinery, tools, and lockers.
- Not recommended for direct application on plastics or wood without appropriate primers.
- Always test on a small, inconspicuous area first if unsure.
Care:
- Clean application tools immediately after use with an appropriate solvent.
- For the painted surface, clean with mild detergent and water. Avoid abrasive cleaners or solvents that could damage the coating.