Ft Paints Texture Paint With Semi Gloss For Commercial Vehicles - 100ml - Anthracite Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and DIY enthusiasts looking to apply a durable, textured finish to industrial machinery, tools, lockers, and steel structures. The key benefit is its robust, semi-gloss protective coating that hides surface imperfections and provides excellent resistance to impact, UV, weather, chemicals, and solvents. A potential caveat is that it's a 2K system, requiring proper mixing and handling.
All features
| Colour | Grey |
|---|---|
| Model Part Number | FT-PU300-100SAM-S-CV |
| Brand | FabioT. |
| Container Volume | 100ml |
Extended Product Information
FAQs
What surfaces is this paint suitable for?
This paint is designed for metal surfaces, including industrial machinery, tools, lockers, and steel structures.
Is this paint suitable for outdoor use?
Yes, it is UV and weather resistant, making it reliable for outdoor durability against sunlight and harsh conditions.
How do I prepare the surface before painting?
Ensure the surface is clean, dry, and free from grease, oil, and rust. A primer may be recommended for optimal adhesion.
What is a 2K polyurethane paint?
A 2K (two-component) system means the paint contains a base and a hardener that must be mixed together in a specific ratio before application to initiate the curing process.
Can this paint be applied with a brush?
The product description recommends spray gun and airless equipment for application. Brush application may not yield the intended textured finish.
How resistant is this paint to chemicals?
It offers strong resistance to common industrial substances such as oils, fuels, and solvents, as well as water and moisture.
What is the finish of this paint?
The paint provides a durable semi-gloss textured finish.
Troubleshooting
Paint not curing properly
Ensure the correct ratio of base and hardener was used and that they were thoroughly mixed. Verify ambient temperature and humidity are within the recommended range for curing.
Poor adhesion to surface
The surface may not have been adequately prepared. Clean the surface thoroughly, remove any contaminants, and ensure it is completely dry. Consider using a suitable primer if necessary.
Uneven texture or finish
Check spray equipment settings (pressure, nozzle size) and application technique. Ensure consistent spray pattern and distance from the surface. Re-coat if necessary, following drying guidelines.
Bubbling or blistering
This can be caused by moisture or solvent entrapment. Ensure the surface is dry and free of contaminants. Avoid applying in excessively humid conditions or too thick a coat.
Pros and Cons
Pros
- Provides a tough, long-lasting protective layer.
- Excellent resistance to environmental factors (UV, weather).
- Resistant to chemicals, solvents, oil, and water.
- Hides surface imperfections for a professional finish.
- Suitable for a wide range of industrial and commercial applications.
- Good adhesion and application properties.
Cons
- 2K system requires precise mixing of components.
- May require specialized application equipment (spray gun, airless).
- Sample size (100ml) is suitable for small projects only.
- Requires proper ventilation and personal protective equipment during application.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) system. Ensure the base and hardener are mixed in the correct ratio as specified by the manufacturer before application. Proper ventilation is crucial during mixing and application. Use appropriate personal protective equipment (PPE), including gloves, eye protection, and a respirator suitable for organic vapors.
Compatibility: Primarily designed for metal surfaces including industrial machinery, components, lockers, tools, and steel structures. Ensure surfaces are clean, dry, and free from grease, oil, and rust before application. A suitable primer may be recommended for optimal adhesion depending on the substrate.
Application: Can be applied using a spray gun or airless spraying equipment. Follow recommended application thickness and drying times to achieve the desired textured finish and durability.
Care: Clean surfaces with mild detergents and water. Avoid abrasive cleaners or harsh solvents that could damage the coating. Regularly inspect for any signs of wear or damage and touch up as needed.