FT Paints Texture Paint - 100ml - Moss Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and DIY enthusiasts working with industrial machinery, tools, and steel structures. The FabioT. RT 2K Polyurethane Texture Paint offers a durable, semi-gloss textured finish that conceals imperfections and provides robust protection. A key caveat is that it requires proper application equipment and ventilation due to its 2K formulation.
All features
| Colour | Green |
|---|---|
| Model Part Number | FT-PU300-100SAM-M-CV |
| Brand | FabioT. |
| Container Volume | 100ml |
Extended Product Information
FAQs
What is the shelf life of the product?
Unmixed components typically have a shelf life of 12 months when stored in original, sealed containers in a cool, dry place. Refer to the product packaging for exact details.
Can this paint be applied with a brush or roller?
While primarily designed for spray application (spray gun or airless), some users may achieve acceptable results with a high-quality roller or brush on smaller areas. However, a spray finish will yield the best aesthetic and protective results.
How long does it take to cure?
Drying and curing times vary depending on temperature, humidity, and film thickness. Typically, it can be handled after a few hours and reaches full hardness within 7 days. Consult the technical data sheet for specific times.
What surfaces can I apply this paint to?
This paint is ideal for ferrous and non-ferrous metals, including steel, iron, aluminum, and galvanized surfaces. It is also suitable for certain plastics if properly primed.
Is this paint suitable for high-heat applications?
This product is designed for general industrial use and offers good durability. It is not specifically formulated for high-heat environments. For such applications, a specialized high-temperature paint should be used.
How do I clean up after using the paint?
Clean spray equipment immediately after use with a recommended solvent cleaner for polyurethane paints. Uncured paint spills should also be cleaned with solvent.
What is the container volume of this specific product?
This specific product variant is a 100ml kit bundle, intended as a sample size.
Troubleshooting
Paint not drying or curing properly
Ensure the correct mixing ratio of base and activator was used. Check that the temperature is within the recommended application range and that there is adequate airflow.
Poor adhesion to the surface
Verify that the surface was properly cleaned, degreased, and free from rust or contaminants. Ensure an appropriate primer was used if necessary and that the paint was applied within its recoat window.
Uneven texture or finish
Adjust spray gun settings (pressure, nozzle size) and maintain a consistent application distance and speed. Ensure the paint is adequately stirred and free from lumps.
Runs or sags in the finish
Apply paint in thinner coats, allowing sufficient flash-off time between coats. Reduce the amount of paint applied per pass and ensure application temperature is suitable.
Pros and Cons
Pros
- Hides surface imperfections with its textured finish.
- Provides excellent resistance to impacts, chemicals, UV, and weather.
- Ensures a durable and long-lasting protective layer.
- Offers good adhesion and a smooth application.
- Suitable for a wide range of industrial and commercial applications.
Cons
- Requires proper application equipment (spray gun/airless).
- Needs adequate ventilation due to the 2K formulation.
- Sample sizes may not be sufficient for large projects.
- Application may require some user skill for optimal results.
Setup, Compatibility & Care
Setup:
This is a 2K (two-component) product. It requires mixing the base with the activator before application. Always follow the manufacturer's specific mixing ratios and induction times as detailed on the product packaging or technical data sheet. Ensure proper ventilation during mixing and application.
Compatibility:
Primarily designed for metal surfaces such as industrial machinery, tools, lockers, and steel structures. It is recommended to use an appropriate primer for optimal adhesion, especially on bare or galvanized metal. Test compatibility with specific substrates before full application.
Care:
Clean application tools immediately after use with a suitable solvent. For the coated surface, routine cleaning can be done with mild detergents and water. Avoid using abrasive cleaners or harsh solvents that could damage the finish. The coating is designed for low maintenance.