Ft Paints - 100ml - Red - Satin Matt
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 100ml sample of FabioT. RT 2K Polyurethane Texture Paint in Red is designed for professionals and DIY enthusiasts seeking a durable, semi-gloss textured finish for industrial machinery, components, tools, and steel structures. Its key benefit is providing a robust, decorative, and defect-hiding coating. A potential caveat is its 2K formula requiring proper mixing and ventilation.
All features
| Colour | Red |
|---|---|
| Model Part Number | FT-PU300-100SAM-M-CV |
| Brand | FabioT. |
| Container Volume | 100ml |
Extended Product Information
FAQs
What surfaces can this paint be used on?
This paint is designed for industrial machinery, components, lockers, tools, and steel structures. It has high adhesion to metal surfaces.
Is this paint suitable for outdoor use?
Yes, the paint is UV and weather resistant, making it reliable for outdoor durability against sunlight and rain.
How do I prepare the surface before painting?
Ensure the surface is clean, dry, and free from any contaminants such as oil, grease, rust, or old paint. Proper surface preparation is crucial for adhesion.
What is a 2K paint system?
A 2K (two-component) paint system means the paint requires two separate components (usually a base and a hardener) to be mixed together just before application. This reaction creates a much harder and more durable finish than single-component paints.
Can I apply this paint with a brush?
The product description mentions suitability for spray gun and airless equipment. While brushing might be possible for touch-ups, it's not the recommended method for achieving an even textured finish.
What is the finish like?
The paint provides a durable, satin matt textured finish.
How should I clean my tools after using this paint?
Clean application tools immediately after use with an appropriate solvent recommended for polyurethane paints.
Troubleshooting
Paint not curing properly
Ensure the two components were mixed in the correct ratio and that environmental conditions (temperature, humidity) are within the recommended range for curing. Insufficient mixing or improper ratios are common causes.
Poor adhesion to surface
Verify the surface was properly prepared, cleaned, and free from any contaminants like oil, grease, or rust. Ensure the correct primer was used if necessary and that the paint was applied to a dry surface.
Uneven or gritty texture
Check for proper mixing of the paint components. Ensure the application equipment is functioning correctly and that the spray nozzle is not clogged. Stir the paint thoroughly during application if it sits for extended periods.
Runs or sags in the finish
This is often due to applying the paint too thickly or at too low a viscosity. Reduce the amount of paint applied per coat and allow adequate flash-off time between coats. Adjust application pressure and distance as needed.
Pros and Cons
Pros
- Provides a durable and impact-resistant protective layer.
- Hides surface defects for a professional appearance.
- Offers excellent resistance to UV, weather, chemicals, and solvents.
- Suitable for a wide range of industrial and commercial applications.
- Ensures high adhesion and smooth application.
Cons
- Requires proper mixing due to its 2K formula.
- Ventilation is necessary during application.
- A 100ml sample size may be insufficient for large projects.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) system. Before application, the two components must be thoroughly mixed according to the manufacturer's instructions. Ensure proper ratios are maintained for optimal curing and performance. It is recommended to use spray gun or airless equipment for application.
Compatibility: This paint is specifically engineered for use on industrial machinery, components, lockers, tools, and steel structures. It adheres well to metal surfaces. Always test on a small, inconspicuous area first if applying to unfamiliar materials.
Care: Clean application tools immediately after use with an appropriate solvent. For the coated surface, once fully cured, cleaning can typically be done with mild soap and water or a suitable industrial cleaner. Avoid abrasive cleaning methods that could damage the textured finish.