Ft Paints Texture Paint - 100ml - Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 100ml Blue FabioT. RT 2K Polyurethane Texture Paint is ideal for professionals and DIY enthusiasts looking to add a durable, semi-gloss textured finish to industrial machinery, tools, lockers, and steel structures. Its key benefit is providing a protective layer that hides surface imperfections while offering excellent resistance to impacts, UV, weather, chemicals, and solvents. A potential caveat is that the 100ml size is best suited for smaller projects or touch-ups due to its limited volume.
All features
| Colour | Blue |
|---|---|
| Model Part Number | FT-PU300-100SAM-S-VE |
| Brand | FabioT. |
| Container Volume | 100ml |
Extended Product Information
FAQs
What surfaces can this paint be used on?
This paint is designed for industrial machinery, components, lockers, tools, and steel structures. It adheres well to properly prepared metal surfaces.
Is this paint suitable for outdoor use?
Yes, it is UV and weather resistant, making it reliable for outdoor durability against sunlight and harsh conditions.
How should I clean painted surfaces?
Clean painted surfaces with mild detergents and water. Avoid using abrasive cleaners or harsh solvents that could damage the finish.
What does '2K' mean in relation to this paint?
2K signifies a two-component product, meaning it contains a base and a hardener that must be mixed together before application to initiate the curing process.
Can I use this paint for automotive applications?
While it offers excellent durability, it is primarily formulated for industrial equipment. Specific automotive paints may be better suited for vehicle bodies, though it can be used on automotive components and tools.
What is the coverage of the 100ml sample?
Coverage can vary based on application thickness and surface porosity. For precise figures, refer to the product's technical data sheet or manufacturer guidelines.
Do I need a special primer?
Surface preparation is key. While the paint offers high adhesion, priming is recommended for optimal results, especially on bare or previously coated surfaces, to ensure maximum durability and performance.
Troubleshooting
Paint not drying or curing properly
Ensure the two components were mixed in the correct ratio and that the temperature is within the recommended application range. Insufficient mixing is a common cause.
Rough or uneven texture
Check spray gun settings, pressure, and distance from the surface. Ensure the paint is applied at a consistent rate. Stirring the paint more frequently during application can also help.
Poor adhesion to the surface
Verify that the surface was properly prepared, cleaned, and degreased before application. Ensure no contamination was present. Reapply after thorough surface preparation.
Runs or sags in the finish
Application may have been too heavy or the paint viscosity too low. Apply in thinner coats, allowing adequate flash-off time between them. Reduce spray gun pressure or increase distance if necessary.
Pros and Cons
Pros
- Provides a durable and aesthetically pleasing textured finish.
- Offers excellent resistance to impacts, chemicals, UV rays, and weather.
- Hides surface imperfections effectively.
- Ensures strong adhesion to metal surfaces.
- Suitable for a wide range of industrial and commercial applications.
Cons
- The 100ml size is best for small projects or touch-ups and may not be sufficient for larger areas.
- Requires specific application equipment (spray gun or airless sprayer).
- As a 2K product, proper mixing and handling procedures are essential.
- May require a primer for optimal adhesion on certain substrates.
- Ventilation is crucial during application due to the nature of polyurethane paints.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) product. Ensure proper mixing ratios are followed as per the manufacturer's instructions before application. Adequate ventilation is essential during application.
Compatibility: Ideal for use on properly prepared ferrous and non-ferrous metal surfaces including industrial machinery, components, lockers, tools, and steel structures. Ensure surfaces are clean, dry, and free from rust, grease, and old coatings before application.
Care: Once fully cured, the surface is highly resistant to chemicals and solvents. Clean with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the finish. Regular cleaning will help maintain its appearance and protective properties.