Ft Paints Texture Paint - 400ml - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K Polyurethane Texture Paint (400ml Aerosol, Black) is designed for professionals and DIY enthusiasts seeking a durable, semi-gloss textured finish for industrial applications. Its key benefit is creating a tough, defect-hiding protective layer that enhances the aesthetic appeal of machinery, tools, and structures. A primary consideration is its 2K (two-component) nature, requiring proper mixing and ventilation, which is standard for high-performance coatings.
All features
| Colour | Black |
|---|---|
| Model Part Number | FT-PU300-400AER-M-VE |
| Brand | FabioT. |
| Container Volume | 400ml |
Extended Product Information
FAQs
What surfaces can this paint be applied to?
This paint is ideal for metal surfaces such as industrial machinery, components, lockers, tools, and steel structures. It can also be used on other substrates if properly primed.
What does '2K' mean for this paint?
2K means it is a two-component product, typically involving a base and a hardener that must be mixed before application to achieve the full performance characteristics.
How long does the textured finish last?
The durability depends on the application environment and exposure. However, the polyurethane-acrylic formula is designed for long-lasting protection against wear, UV, weather, and chemicals.
Can this paint be used outdoors?
Yes, it is UV and weather resistant, making it suitable for outdoor applications on metal structures.
How do I prepare the surface before painting?
The surface must be clean, dry, and free from grease, oil, and contaminants. Light sanding may be recommended for smooth surfaces to improve adhesion.
What is the drying time?
Drying times can vary based on temperature and humidity. Refer to the product's specific instructions for detailed drying and recoating times.
Is this paint available in different finishes?
This specific product offers a semi-gloss textured finish. However, FabioT. offers other variants with different finishes and colors.
Troubleshooting
Uneven texture or finish
Ensure the can was shaken thoroughly and consistently during application. Maintain an even spray distance and speed. Check for nozzle clogging and clean if necessary.
Poor adhesion
Verify the surface was properly cleaned and prepared before application. Remove all grease, oil, and contaminants. Lightly sand smooth surfaces to create a better profile for adhesion.
Coating runs or sags
Apply in thin, even coats rather than one thick coat. Reduce spray pressure slightly or increase the spray distance. Avoid over-application.
Aerosol can not spraying
Ensure the mixing ball is loose by shaking vigorously. Check the nozzle for blockages and clean with a fine needle if necessary. If the can is empty, it will not spray.
Pros and Cons
Pros
- Provides a highly durable and protective finish.
- Effectively conceals minor surface defects.
- Resistant to UV, weather, chemicals, and solvents.
- Offers excellent adhesion to metal surfaces.
- Suitable for a wide range of industrial applications.
Cons
- Requires proper mixing due to its 2K formulation.
- Ventilation is crucial during application.
- May require specialized spray equipment for optimal results.
- Aerosol can limits large-scale projects.
- Textured finish may be difficult to clean in some highly soiled environments.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) product. Ensure proper mixing of the components as per the manufacturer's instructions before application. Shake the aerosol can thoroughly for at least two minutes after the mixing ball begins to rattle. For best results, apply in a well-ventilated area, ideally between 15-25°C (59-77°F).
Compatibility: Primarily designed for metal surfaces including industrial machinery, components, lockers, tools, and steel structures. It adheres well to properly prepared metal. Ensure the surface is clean, dry, and free from grease, oil, and old paint. For optimal adhesion, a light sanding may be required on smooth surfaces.
Care: To maintain the finish, wipe down surfaces with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could degrade the coating. For industrial cleaning, use mild detergents. Regularly inspect treated surfaces for any signs of damage and perform touch-ups as needed.