Ft Paints Texture Paint - 400ml - Moss Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. FT 2K Polyurethane Texture Paint in 400ml Moss Green is designed for professionals and DIY enthusiasts needing a durable, textured finish for industrial machinery, tools, lockers, and steel structures. Its key benefit is providing a robust, semi-gloss coating that hides surface imperfections and offers excellent resistance to impacts, UV, weather, chemicals, and solvents. A potential caveat is the 2K nature, which may require specific handling and mixing procedures not typical for single-component paints.
All features
| Colour | Green |
|---|---|
| Model Part Number | FT-PU300-400AER-M-CV |
| Brand | FabioT. |
| Container Volume | 400ml |
Extended Product Information
FAQs
What is a 2K Polyurethane paint?
A 2K (two-component) paint contains a base and a hardener that are mixed together before application. This reaction creates a much harder, more durable, and chemically resistant finish than single-component paints.
How do I activate the 2K system in the aerosol can?
For aerosol cans, the two components are typically pre-mixed. Shaking the can vigorously for the recommended time activates the chemical reaction within the can, initiating the curing process. It's important to use the product shortly after activation as specified by the manufacturer.
What is the drying and curing time?
Drying and curing times can vary based on temperature, humidity, and film thickness. Refer to the product's technical data sheet for specific times, but typically, touch dry is within a few hours, while full cure can take several days.
Can this paint be used on wood or plastic?
This paint is specifically formulated for metal surfaces. For optimal results and adhesion on wood or plastic, appropriate primers designed for those materials would be necessary.
How long is the shelf life of the aerosol can?
Unactivated aerosol cans typically have a long shelf life if stored in a cool, dry place away from direct sunlight. Once activated (by shaking), the paint has a limited pot life and should be used within the recommended timeframe, often within a few hours.
What safety precautions should I take when using this paint?
Always use in a well-ventilated area. Wear appropriate personal protective equipment, including a respirator suitable for organic vapors, safety glasses, and gloves. Avoid contact with skin and eyes.
Troubleshooting
Paint not spraying evenly
Ensure the can is adequately shaken and held at the correct distance (approx. 25-30 cm) from the surface. Check that the nozzle is not blocked.
Uneven texture or finish
Maintain a consistent spraying motion and speed. Avoid applying too much paint in one pass, which can lead to sagging or irregular texture. Ensure the surface is properly prepared.
Coating lacks durability
Verify that the paint was applied to a clean, properly primed surface and allowed to cure fully according to manufacturer instructions. Ensure the 2K components (if applicable for non-aerosol versions) were mixed correctly.
Paint peeling or chipping
This usually indicates poor surface preparation or lack of adhesion. Ensure the surface was degreased and any rust or loose material was removed prior to application. Consider using an appropriate primer.
Pros and Cons
Pros
- Provides a durable, textured finish that hides surface imperfections.
- Excellent resistance to impact, UV, weather, chemicals, and solvents.
- Suitable for a wide range of industrial and commercial applications.
- Offers good adhesion and uniform coverage.
- Available in a convenient 400ml aerosol can for smaller projects.
Cons
- As a 2K product, it may require mixing and specific application conditions.
- Textured finish might not be suitable for all aesthetic preferences.
- Aerosol format limits the volume for very large projects.
- Requires proper ventilation and personal protective equipment during application.
Setup, Compatibility & Care
Setup: Ensure the surface to be painted is clean, dry, and free from grease, oil, and loose paint. For 2K aerosol products, thoroughly shake the can for at least two minutes before use. Remove the safety tab and press the nozzle to dispense.
Compatibility: This paint is specifically formulated for metal surfaces including industrial machinery, components, lockers, tools, and steel structures. It is designed as a topcoat and may require a compatible primer for optimal adhesion and performance on certain substrates.
Care: Once cured, the surface can be cleaned with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the finish. Regular cleaning will help maintain the protective qualities and appearance of the coating.