Ft Paints Texture Paint - 400ml - Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 400ml aerosol can of FabioT. RT 2K Polyurethane Texture Paint in Grey is designed for professionals and DIY enthusiasts seeking a durable, semi-gloss, textured finish for industrial machinery, tools, lockers, and steel structures. Its key benefit is providing a tough, protective layer that hides imperfections and offers excellent resistance to impact, UV rays, weather, chemicals, and solvents, ensuring a long-lasting, professional appearance. A potential caveat is the need for proper ventilation during application due to its 2K formula.
All features
| Colour | Grey |
|---|---|
| Model Part Number | FT-PU300-400AER-S-CV |
| Brand | FabioT. |
| Container Volume | 400ml |
Extended Product Information
FAQs
What surfaces is this paint suitable for?
This paint is designed for metal surfaces, including industrial machinery, components, lockers, tools, and steel structures.
How do I prepare the surface before painting?
The surface must be clean, dry, and free from grease, oil, and rust. Light abrasion is recommended for optimal adhesion.
What is the best way to apply this paint?
Shake the can vigorously for at least two minutes. Apply in light, even coats using a spray gun or airless equipment, maintaining a consistent distance and speed.
Is ventilation required during application?
Yes, due to its 2K polyurethane-acrylic formula, it is essential to use the paint in a well-ventilated area.
How should I clean the spray nozzle after use?
After painting, invert the can and spray for a few seconds to clear the nozzle. If clogged, clean with a suitable solvent or replace the nozzle.
What is the finish of this paint?
The paint provides a durable, semi-gloss textured finish.
Can this paint be used outdoors?
Yes, it is UV and weather resistant, making it suitable for outdoor durability.
Troubleshooting
Uneven texture or coverage
Ensure the can is shaken thoroughly before and during use. Maintain a consistent spray distance and speed. Adjust spray nozzle if necessary and reapply in light, even coats.
Paint not spraying or sputtering
Clear the nozzle by inverting the can and spraying briefly. If clogged, remove and clean the nozzle with a solvent or replace it.
Poor adhesion or peeling
Ensure the surface was properly cleaned and prepared (free from grease, oil, dust, and rust). Ensure the correct primer was used if applicable for the substrate. Allow adequate drying time between coats.
Runs or sags in the finish
Apply paint in thin, even coats. Avoid applying too much paint in a single pass. Maintain a consistent spraying distance and speed.
Pros and Cons
Pros
- Provides a robust, protective, and aesthetically pleasing textured finish.
- Excellent resistance to impact, UV, weather, chemicals, and solvents.
- Hides surface imperfections effectively, requiring less surface preparation.
- Durable and long-lasting, suitable for demanding environments.
- Good adhesion to metal surfaces.
Cons
- Requires proper ventilation due to its 2K formulation.
- Specific application equipment may be needed for optimal results.
- Aerosol format limits the volume for very large projects.
- May require specialized knowledge for achieving perfect results.
Setup, Compatibility & Care
Setup: Ensure the surface to be painted is clean, dry, and free from grease, oil, and rust. For best results, lightly abrade the surface to promote adhesion. Shake the aerosol can vigorously for at least two minutes after hearing the mixing ball rattle. Test spray on a small, inconspicuous area first.
Compatibility: This paint is formulated for use on metal surfaces including industrial machinery, components, lockers, tools, and steel structures. It is suitable for spray gun and airless application.
Care: Store the can in a cool, dry place away from direct sunlight and sources of ignition. After use, invert the can and spray for a few seconds to clear the nozzle. Clean any spills or overspray immediately with a suitable solvent before the paint cures.