Ft Paints Food-Safe Paint With Gloss Finish For Food-Contact Metal Surfaces - 400Ml - Ral 7042-Traffic Grey A
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K PU Topcoat (400ml Aerosol, RAL 7042 Traffic Grey A, Gloss Finish) is a professional-grade polyurethane acrylic coating ideal for commercial vehicles, machinery, and industrial components that require high durability and a superior finish. Its key benefit is exceptional resistance to UV, weather, chemicals, and mechanical wear, with a notable food-safe certification for dry, abrasive contact when used with appropriate primers. A potential consideration is its specific application requirements for achieving food-safe certification.
All features
| Colour | Grey |
|---|---|
| Model Part Number | FT-PU240-400AER-G-FM |
| Brand | FabioT. |
| Container Volume | 400 |
Extended Product Information
FAQs
What is the shelf life of the aerosol can?
The shelf life is typically indicated on the can. Store in a cool, dry place away from direct sunlight and heat sources.
How long does it take for the coating to be fully dry?
The coating is dust-dry in 25–30 minutes at 20°C. However, it achieves full cure strength and maximum hardness in 5–6 days.
Can this paint be used on plastic surfaces?
This product is designed for metal, aluminum, and glass. Adhesion to plastics can be unpredictable and may require specialized primers, which are not covered by its standard specifications.
How should I dispose of used aerosol cans?
Dispose of used or partially used cans according to local regulations for aerosol products and hazardous waste. Do not puncture or incinerate.
What is the coverage rate for the 400ml aerosol can?
Coverage varies depending on application thickness and surface porosity. A general estimate for a 400ml can is approximately 1-1.5 square meters in a single coat.
Is the gloss finish resistant to scratching?
Yes, the polyurethane acrylic formula provides outstanding mechanical durability and scratch resistance once fully cured.
Can I recoat over existing paint?
Recoating is possible if the existing paint is sound, clean, and compatible. Lightly abrading the surface and ensuring it is free from contaminants will improve adhesion. Always test on an inconspicuous area first.
Troubleshooting
Uneven spray pattern or sputtering
Ensure the can is adequately shaken. Check the nozzle for blockages; if blocked, clear it with a fine needle or replace the nozzle. Avoid spraying at extreme angles.
Poor adhesion or peeling
Verify that the surface was properly prepared (cleaned and degreased). Ensure the correct primer was used and allowed to cure adequately. Check application temperature and humidity conditions.
Runs or drips in the finish
Apply in thinner coats and maintain a consistent distance from the surface. Do not apply too heavily. Reduce spray pressure or increase drying time between coats if necessary.
Loss of gloss or haziness
This can be caused by moisture contamination or improper curing. Ensure application conditions are optimal. Allow for full cure before exposing to harsh conditions.
Surface remains tacky after application
Check application temperature and humidity. High humidity or low temperatures can slow down the curing process. Ensure adequate ventilation. If contamination is suspected, the surface may need to be lightly abraded and recoated.
Pros and Cons
Pros
- Offers excellent resistance to UV, weather, chemicals, and mechanical stress.
- Achieves a professional, high-gloss finish.
- Certified food-safe for dry, abrasive food contact when used with EP primers.
- High heat resistance suitable for demanding environments.
- Fast drying time improves application efficiency.
Cons
- Requires specific EP primers to meet food-safe certification.
- Aerosol format may be less economical for very large projects compared to bulk options.
- Full cure takes several days, requiring patience before heavy use.
- Specific application conditions (temperature, humidity) may affect drying and performance.
Setup, Compatibility & Care Instructions
Setup: This product is provided in a 400ml aerosol can. Ensure the surface to be coated is clean, dry, and free from grease, oil, and dust. For optimal adhesion and to achieve food-safe certification, pre-treat the substrate with an appropriate FabioT. EP primer, following the primer manufacturer's instructions.
Compatibility: Suitable for application on metal, aluminum, and glass. It can be applied using standard aerosol techniques or potentially via electrostatic spray for greater efficiency on complex shapes. For food-safe applications, always use in conjunction with FabioT. EP primers.
Application: Shake the aerosol can vigorously for at least two minutes before use. Apply in thin, even coats from a distance of approximately 20-25 cm. Allow adequate flash-off time between coats. Recommended application temperature is between 15°C and 25°C with humidity below 60% for best results.
Care: Once fully cured (5-6 days), the surface can be cleaned using mild detergents and water. Avoid abrasive cleaning methods that could damage the gloss finish. For industrial cleaning, use solvents compatible with polyurethane coatings.