Ft Paints Texture Paint - 20000ml - Red
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K Polyurethane Texture Paint is a premium, semi-gloss textured coating designed for professionals seeking a durable and visually appealing finish for industrial machinery, components, lockers, tools, and steel structures. Its key benefit is providing a robust, defect-hiding protective layer with excellent resistance to impact, UV, weather, and chemicals. A potential caveat is the requirement for a two-component application (paint, hardener, and thinner), which necessitates careful mixing and handling.
All features
| Colour | Red |
|---|---|
| Model Part Number | FT-PU300-P13.8L-H3.4L-T2.8L-M-VE |
| Brand | FabioT. |
| Container Volume | 20000ml |
Extended Product Information
FAQs
What is the mix ratio for the 20L kit?
The 20.0 L Kit includes 13.8 L Paint, 3.4 L Hardener, and 2.8 L Thinner. Always refer to the product's technical data sheet for precise mixing instructions.
Can this paint be applied with a brush or roller?
This product is designed for application with spray gun or airless equipment to achieve the best textured finish. Brush or roller application may not yield the desired texture and may affect performance.
What is the recommended drying time?
Drying times can vary based on temperature, humidity, and film thickness. Refer to the product's technical data sheet for specific recoat and handling times.
How should I store the mixed paint?
Mixed paint has a limited pot life and should be used within the recommended time frame. Unmixed components should be stored in a cool, dry place away from direct sunlight and extreme temperatures.
Is this paint suitable for automotive exteriors?
While durable, this paint is specifically formulated for industrial machinery, tools, and structures. For automotive exteriors, specialized automotive paints may be more appropriate.
What kind of surface preparation is needed?
The surface must be clean, dry, and free from grease, oil, dirt, and any other contaminants. Light abrasion of the surface can improve adhesion.
What PPE is required when using this paint?
Appropriate PPE includes chemical-resistant gloves, eye protection (goggles or face shield), and respiratory protection (respirator suitable for organic vapors and particulates) due to the 2K nature and solvent content.
Troubleshooting
Paint not curing properly
Ensure the correct hardener ratio was used and that the components were thoroughly mixed. Check ambient temperature and humidity, as they can affect curing times.
Rough or uneven texture
Verify the correct spray tip size and pressure were used. Ensure adequate thinning and that the paint was applied evenly. Check for blockages in the spray equipment.
Poor adhesion to surface
The substrate may not have been properly prepared. Ensure the surface was clean, dry, and free from contaminants before application. Lightly abrading the surface may improve adhesion.
Sagging or running during application
The paint may have been applied too thickly or the spray gun was held too close to the surface. Apply in thinner, even coats and maintain a consistent distance.
Pros and Cons
Pros
- Provides a robust, defect-hiding textured finish.
- Excellent resistance to impact, UV rays, weather, and chemicals.
- Ensures strong adhesion and uniform coverage on metal surfaces.
- Suitable for a wide range of industrial and commercial applications.
- Offers long-lasting protection in demanding environments.
Cons
- Requires a two-component mixing process (paint, hardener, thinner).
- Application may require specialized spray equipment.
- Performance may vary depending on surface preparation and application technique.
- Specific color and finish options are limited to available variants.
- Not suitable for all substrate types without proper priming.
Setup, Compatibility & Care Instructions
Setup:
This is a 2K (two-component) product. It requires mixing the paint, hardener, and thinner in the correct proportions as specified by the manufacturer. Ensure thorough mixing to achieve a homogenous product. Apply using a spray gun or airless equipment. Proper ventilation and personal protective equipment (PPE) are essential during application.
Compatibility:
This paint is designed for use on industrial machinery, components, lockers, tools, and steel structures. It offers excellent adhesion to properly prepared metal surfaces. Always ensure the substrate is clean, dry, and free from grease, oil, and contaminants before application. If applying over existing coatings, test for compatibility.
Care:
To maintain the finish, clean surfaces with a mild detergent and water. Avoid abrasive cleaners or solvents that could damage the coating. Regularly inspect for any signs of wear or damage and address them promptly to ensure continued protection.