Johnstone's Washable Matt Emulsion Paint 2.5L - China Clay

Use a soft, damp cloth and, if needed, a small amount of mild soap. Gently wipe the mark, then rinse the cloth and wipe again to remove any soap residue. Avoid abrasive cleaners or aggressive scrubbing to maintain the matt finish.

For best results and full colour depth, two coats are typically recommended, especially if you are painting over a significantly different colour. One coat might suffice for freshening up a similar shade on a well-prepared surface.

This paint is suitable for general interior walls and ceilings. While washable, for high-moisture areas like bathrooms and kitchens, paints specifically formulated with enhanced mould resistance and higher durability for such environments are generally recommended.

Typically, this paint is touch dry in 1-2 hours. However, it's crucial to allow 2-4 hours before applying a second coat to ensure proper adhesion and an even finish. Always refer to the specific instructions on the paint can.

No, this washable matt emulsion is formulated for interior walls and ceilings. For wood or metal surfaces, you should use paints specifically designed for those materials, often requiring different primers and finishes.

Store any leftover paint in its original container, tightly sealed, in a cool, dry, frost-free place away from direct sunlight. Ensure the lid is securely closed to prevent the paint from drying out.

Ensure the surface was thoroughly clean, dry, and properly prepared (e.g., sanded, filled, and primed if necessary) before application. Poor surface adhesion is often due to inadequate preparation.

Apply the paint evenly, avoiding excessive pressure. Use a good quality roller or brush, and ensure consistent coverage. Always apply two thin coats rather than one thick coat, allowing proper drying time between applications.

Lighting conditions significantly affect how a colour appears. Always test a small patch in the actual room and view it under different lighting (natural and artificial) before painting the entire area. Ensure the paint was thoroughly stirred before use.

Check room temperature and humidity. Paint dries best in well-ventilated areas at moderate temperatures (typically 10-25°C) and low humidity. Ensure coats are not applied too thickly, as this can prolong drying.