Setup, Compatibility & Care
Setup & Application
- Prepare the Surface: Ensure all surfaces are clean, dry, and free from dust, dirt, and grease. Fill any holes or cracks and sand smooth. For new, bare, or highly absorbent surfaces, apply a suitable primer or a mist coat (first coat diluted with up to 10% water) for optimal adhesion.
- Stir Thoroughly: Before and during use, stir the paint well to ensure a consistent colour and finish.
- Apply Coats: Apply paint using a brush, roller, or spray gun. For best results, typically two coats are recommended. Allow sufficient drying time between coats (refer to the product label for specific times).
- Ventilation: Ensure good ventilation in the room during application and drying.
Compatibility
This emulsion paint is designed for interior walls and ceilings. It is generally compatible with common indoor surfaces such as plaster, plasterboard, wood, and appropriately primed metal.
Care & Maintenance
- Prompt Cleaning: For best results, clean spills and marks as soon as possible after they occur.
- Cleaning Method: Use a soft, damp cloth, possibly with a small amount of mild, non-abrasive soap, to gently wipe the affected area. Avoid harsh scrubbing, abrasive cleaners, or stiff brushes, which can damage the matt finish.
- Drying: Allow the cleaned area to air dry naturally.
- Storage: Store the paint in a cool, dry place, away from direct sunlight and frost. Ensure the lid is tightly sealed to prevent the paint from drying out.