Setup, Compatibility & Care
Setup Instructions
- Preparation: Ensure surfaces are clean, dry, and free from loose material. Fill any cracks or holes and sand smooth. For bare or highly absorbent surfaces, a suitable primer or mist coat (diluted paint) may be required.
- Mixing: Stir the paint thoroughly before use. Do not dilute unless creating a mist coat for bare plaster (refer to product packaging for specific dilution ratios).
- Application: Apply with a good quality brush or roller. For best results, apply two coats, allowing sufficient drying time between coats (typically 2-4 hours).
- Ventilation: Ensure good ventilation during application and drying.
Compatibility
This paint is specifically formulated for interior walls and ceilings. It is suitable for application on:
- Plaster
- Plasterboard
- Well-prepared masonry
- Other common interior surfaces
It is not recommended for exterior use or areas subject to constant high moisture levels (e.g., shower cubicles).
Care & Maintenance
- Cleaning: For everyday spills and marks, gently wipe the painted surface with a soft, damp cloth and a mild detergent. Avoid abrasive cleaners or scrubbing, as this can damage the matt finish.
- Curing Time: Allow the paint to fully cure for approximately 7-14 days before attempting any cleaning to ensure maximum durability and prevent damage.
- Storage: Store leftover paint in a cool, dry, frost-free place, ensuring the lid is tightly sealed to maintain its quality.