Johnstone's Washable Matt Emulsion Paint 2.5L - Blue

Typically, two coats are recommended for optimal colour depth and durability. However, this can vary depending on the original wall colour and desired finish. Lighter colours over darker bases may require an additional coat.

Yes, its washable and durable nature makes it suitable for bathrooms and kitchens, particularly in areas not directly exposed to excessive moisture or condensation. For very high humidity areas, a specialized bathroom paint with enhanced mould resistance might be considered, though this washable matt is designed to withstand cleaning.

For best results with emulsion paint, use a good quality synthetic bristle brush for cutting in and edges, and a medium pile (around 9-12mm) roller for larger wall and ceiling areas. This will help achieve a smooth, even finish.

This paint has a quick drying time. It is typically touch dry within 1-2 hours and can be recoated after 2-4 hours. Always check the specific guidance on the can, as drying times can vary with temperature and humidity.

No, Johnstone's Washable Matt Emulsion Paint is specifically formulated for interior walls and ceilings. For exterior projects, you would need to use a dedicated exterior paint product.

Do not pour leftover paint down drains. Allow small amounts of paint to dry out in the can, then dispose of it with household waste. For larger quantities, contact your local council or waste disposal facility for guidance on proper hazardous waste disposal.

Ensure the surface was properly prepared (smooth and clean). Apply paint evenly using consistent pressure with your roller, avoiding overloading it. Apply in thin, even coats and allow sufficient drying time between applications.

Check room temperature and humidity; paint dries best in moderate conditions with good ventilation. Ensure you are applying thin coats rather than thick layers. Increase airflow by opening windows or using a fan (not directed directly at the wet paint).

This often indicates poor surface preparation. Ensure walls are thoroughly cleaned, dried, and free of loose material before painting. For porous or chalky surfaces, a suitable primer or stabilising solution should be applied first to ensure proper adhesion.

Lighting conditions (natural vs. artificial, warm vs. cool light) can significantly alter how a colour appears. Always test a small, inconspicuous area first. Also, ensure the paint was thoroughly stirred before and during use to distribute pigments evenly.