Best current price£3.74from Blueperry agriculture (UK)
Shopping.co.uk recommended and popular offers
Blueperry agriculture (UK)£3.74Visit shop Maxicolor Green Spray Paint Gloss Leaves 400Ml Mx6002
Visit shop
B&Q£7.76Visit shop B&Q - Mx6002 Spray Gloss Leaves Green Ral6002 400Ml Mxcmx6002
Visit shop10 offers from £3.74 - £8.85
View price history by clicking the chart icon.
The MaxiColor Spray Gloss in Fir Green is ideal for DIY enthusiasts and hobbyists looking to add a durable, vibrant finish to a variety of surfaces. Its key benefit is excellent coverage and minimal dripping, ensuring a professional look with ease. A potential caveat is the need for proper surface preparation for optimal adhesion. This spray paint is designed for both interior and exterior use, offering versatility for numerous projects.
| Colour | Green |
|---|---|
| Model Part Number | MX6009 |
| Brand | MAXICOLOR |
MaxiColor Spray Gloss is suitable for a wide range of surfaces including treated and untreated wood, metal, aluminum, glass, stone, and most plastics. Always test on a small, inconspicuous area first.
While MaxiColor has good adhesion, using a primer is recommended for certain challenging surfaces like bare plastic or heavily weathered wood to ensure optimal adhesion and a longer-lasting finish.
For best results and maximum durability, apply 2-3 thin, even coats. Allow each coat to dry for approximately 15-30 minutes before applying the next. Avoid applying thick coats, which can lead to drips.
Yes, MaxiColor Spray Gloss is formulated for both indoor and outdoor use, offering resistance to various weather conditions.
After each use, invert the can and spray for a few seconds until clear propellant emerges. This prevents the nozzle from clogging.
The paint is touch-dry within minutes, and typically ready for a recoat within 15-30 minutes. Full cure time may take longer depending on temperature and humidity.
Always use in a well-ventilated area, preferably outdoors. Wear appropriate personal protective equipment, including gloves and a mask. Avoid spraying near open flames or heat sources.
Shake the can more vigorously. Ensure the nozzle is not clogged; if it is, clean it by inverting the can and spraying or replace the nozzle.
Apply paint in thinner coats, holding the can at a consistent distance (approximately 10-12 inches). Avoid over-applying in one go. If drips occur, let them dry and carefully sand them down before reapplying.
Ensure the surface was properly prepared: clean, dry, and free of contaminants. Lightly sand the surface before application, especially on smooth or glossy materials.
This is normal for many spray paints. Allow the first coat to dry and apply subsequent thin, even coats until desired opacity is achieved.
Check that the nozzle is not blocked. Ensure the can is being held upright and is sufficiently shaken. If the nozzle is clear and the can is still full, there may be an internal issue.
Setup:
Compatibility:
Care:
