MaxiColor Spray Gloss Rape Yellow 400ml - Saxon - MX1021

The MaxiColor spray paint is fast-drying. Typically, it is touch-dry within 10-15 minutes, and recoatable after approximately 30-60 minutes, depending on temperature and humidity.

While it can be used on metal, it is not specifically formulated as automotive paint. For car parts, especially those exposed to high heat or abrasion, a specialized automotive paint may be more suitable.

Clean the plastic thoroughly with soap and water, then degrease with a suitable solvent. Lightly sand the surface to create a key. Apply a plastic primer before using the MaxiColor spray paint for optimal adhesion.

A 400ml can typically covers approximately 1.5 to 2 square meters with a single coat, depending on the surface and application technique.

Yes, 'Rape Yellow' is a recognized color name and code (RAL 1021) used in paint and pigment industries, denoting a specific bright yellow shade.

Store the can upright in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the nozzle is clean by inverting the can and spraying briefly after each use.

Shake the can more vigorously for an extended period. Ensure the nozzle is not blocked; if necessary, clean it gently with a solvent.

Ensure the surface was properly cleaned, dried, and free from contaminants. Consider using a primer, especially on difficult surfaces like certain plastics.

Apply paint in thin, even coats from an appropriate distance (typically 20-30 cm). Avoid over-applying in one go. If drips occur, let them dry and then lightly sand them down before applying another thin coat.

Check if the nozzle is clear. Turn the can upside down and spray briefly to clear any obstructions. Ensure the temperature is within the recommended range for application.