Best current price£3.74from Blueperry agriculture (UK)
Shopping.co.uk recommended and popular offers
Blueperry agriculture (UK)£3.74Visit shop Maxicolor Light/Grey Spray Paint Gloss 400Ml Mx7035
Visit shop
eBay£5.98Visit shop Maxicolor Gloss Silver Grey RAL Spray Paint 400ml Fast Dry Indoor Outdoor Use
Visit shop
B&Q£7.76Visit shop B&Q - Mx7016 Spray Gloss Anthratice Grey Ral7016 400Ml Mxcmx7016
Visit shop17 offers from £3.74 - £8.85
View price history by clicking the chart icon.
This guide is for DIY enthusiasts, hobbyists, and homeowners looking for a versatile and high-coverage spray paint. The MaxiColor Gloss Silver Grey (RAL7001) offers excellent adhesion and a durable finish suitable for numerous surfaces, indoors and out. A key consideration is proper surface preparation for optimal results.
| Colour | Grey |
|---|---|
| Model Part Number | MX7001 |
| Brand | MAXICOLOR |
MaxiColor spray paint is suitable for use on treated and untreated wood, metal, aluminium, glass, stone, and plastic. For best results on plastics, testing or using a plastic primer is advised.
The surface should be clean, dry, and free from dust, grease, and rust. Light sanding may be necessary for rough surfaces or to improve adhesion. A primer may be beneficial for certain materials like bare wood or metal.
Drying times can vary based on temperature, humidity, and coat thickness. Generally, it dries to the touch relatively quickly, but recoating may require waiting for at least 1-2 hours. Refer to the can for specific drying times.
Yes, MaxiColor is formulated for both indoor and outdoor use, offering durability against weather conditions.
After painting, turn the can upside down and press the nozzle for a few seconds until only clear propellant sprays out. This prevents the nozzle from clogging.
Yes, MaxiColor paints are available in a wide range of RAL colours. This specific product is Silver Grey (RAL7001), but other colours are available.
A 400ml can typically covers approximately 1.5 to 2 square meters, depending on the surface and application thickness. Always check the product label for specific coverage information.
Ensure the can is shaken sufficiently before and during use. Maintain a consistent distance (20-25 cm) from the surface and use smooth, sweeping motions. Apply thin coats rather than one heavy coat.
Verify the surface was properly cleaned and degreased. Ensure it was dry before application. For certain materials like bare metal or specific plastics, a primer may be required. Ensure compatibility with the surface material.
Shake the can well before use. After spraying, invert the can and spray for a few seconds to clear the nozzle. If clogging persists, try removing the nozzle and cleaning it with a solvent suitable for paints, then reattach.
Apply paint in thin, even coats. Avoid spraying too heavily or too close to the surface. If runs occur, allow them to dry, then gently sand them smooth and reapply a thin coat.
Compatibility: This paint is compatible with treated and untreated wood, metal, aluminium, glass, stone, and most plastics. For plastics, testing on an inconspicuous area or using a plastic primer is recommended.
Setup:
Care:
