Ft Paints 100 Ml Sample Water-Based Polyurethane Paint For Industrial Equipment - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FT Paints RT 2K PU Topcoat in Black is a premium waterborne polyurethane coating designed for professionals and DIY enthusiasts needing superior protection for vehicles, machinery, and metal structures. Its key benefit is exceptional resistance to mechanical and chemical stress, ensuring long-lasting durability in demanding environments. A potential caveat to consider is the extended full cure time, requiring patience for maximum hardness. This 2K coating offers a semi-gloss finish with excellent UV and weather resistance, outstanding solvent and scratch resistance, and heat resistance up to 180°C.
All features
| Colour | Black |
|---|---|
| Model Part Number | RT 2K PU |
| Brand | FabioT. |
Extended Product Information
FAQs
What is the mixing ratio for the RT 2K PU Topcoat?
The exact mixing ratio (base to hardener) can vary. Always refer to the specific Technical Data Sheet (TDS) for the RT 2K PU Topcoat you are using for the precise ratio, typically provided in parts by volume.
Can this coating be applied with a brush or roller?
While primarily designed for spraying, brush or roller application may be possible for small areas or touch-ups. However, achieving a uniform finish can be challenging, and the TDS should be consulted for specific guidance on non-spray applications.
What is the shelf life of the RT 2K PU Topcoat?
The shelf life depends on storage conditions. Typically, unopened containers stored in a cool, dry place, away from direct sunlight, will last for a specified period (e.g., 12-24 months). Refer to the product packaging or TDS for the exact expiry date.
How long does it take for the coating to be fully cured?
The coating is dust-dry in approximately 1-1.5 hours. However, it requires a longer period for a full cure, typically around 7-8 days, to achieve its maximum hardness and chemical resistance.
Is this product suitable for food contact surfaces?
No, this product is engineered for industrial and automotive applications requiring high mechanical and chemical resistance. It is not certified or recommended for direct food contact.
What is the typical VOC content?
As a waterborne polyurethane, its VOC content is generally lower than traditional solvent-borne coatings. Consult the product's Safety Data Sheet (SDS) for specific VOC information.
Can I apply another coat if needed?
Yes, recoating is possible within specific recoat windows. Applying subsequent coats outside these windows may require light abrasion to ensure adhesion. Consult the TDS for detailed recoat information.
Troubleshooting
Coating is not drying properly or remains soft
Ensure the correct mixing ratio of base and hardener was used. Verify that the ambient temperature and humidity are within the recommended application range. Check if the product has passed its shelf life or if the hardener has been contaminated.
Poor adhesion or peeling
The surface may not have been properly prepared or cleaned. Ensure all grease, oil, rust, and old coatings were removed. Confirm compatibility with the primer used and ensure adequate drying time between primer and topcoat layers.
Uneven finish or "orange peel"
Adjust spray gun settings (pressure, nozzle size), spray distance, and speed. Ensure the coating is thinned to the correct viscosity. Check for proper mixing and temperature of the product during application.
Solvent or chemical spotting
This indicates the coating has not fully cured. Avoid exposure to solvents or harsh chemicals until the full cure time (7-8 days) has passed. Ensure the product was applied at the recommended film thickness.
Pros and Cons
Pros
- Exceptional resistance to mechanical and chemical stress.
- Excellent UV and weather resistance for outdoor durability.
- High scratch and solvent resistance for industrial environments.
- Good heat resistance for demanding applications.
- Extended open time aids in application, especially for large areas.
- Fast dust-drying time speeds up the initial stages of the process.
Cons
- Full cure takes up to 7-8 days, requiring patience for maximum hardness.
- Requires a 2K mixing process, which may be more complex for beginners.
- Availability might be limited to specialized industrial paint suppliers.
- Waterborne formula may have different application considerations than solvent-based alternatives.
- Only one sample size (100ml) is available for testing, which may be insufficient for larger projects.
Setup, Compatibility & Care
Setup: The RT 2K PU Topcoat is a two-component (2K) system. It requires precise mixing of the base coat and hardener. Refer to the product's Technical Data Sheet (TDS) for the exact mixing ratio (often expressed as parts by volume, e.g., 3:1). Mix thoroughly using a mechanical stirrer or by hand with a clean mixing stick until uniform. Allow for a short induction or 'sweat-in' period if recommended by the manufacturer before application.
Application: This coating is designed for spraying. Ensure proper ventilation and use appropriate Personal Protective Equipment (PPE), including a respirator, gloves, and eye protection. Thinning may be required depending on the application method and desired viscosity; consult the TDS for recommended thinners and maximum percentages.
Compatibility: This product is compatible with WEP Primers for optimal adhesion. Ensure all surfaces are clean, dry, and free from contaminants like oil, grease, and rust. For optimal results, use on appropriately prepared metal substrates.
Care: To maintain the finish, clean surfaces with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the coating. Minor scratches may be buffed out if addressed promptly, but significant damage may require recoating a prepared area.