Ft Paints Water-Based Polyurethane Paint - 100 Ml Sample - Signal Yellow
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K PU Topcoat is a premium, waterborne polyurethane coating designed for applications requiring high resistance to mechanical and chemical stress, such as vehicles, machinery, and metal structures. Its semi-gloss finish offers excellent UV and weather resistance, superior solvent and scratch protection, and can withstand heat up to 180°C. While it provides a durable and attractive finish with an extended open time for easier application, users should be aware of its 7-8 day full curing time.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | RT 2K |
| Brand | FabioT. |
Extended Product Information
FAQs
What is the intended use for the FabioT. RT 2K PU Topcoat?
It is designed for vehicles, machinery, and metal structures that are exposed to high mechanical and chemical stress, offering excellent UV and weather resistance.
What is the finish of this coating?
The coating provides a durable semi-gloss finish.
How long does it take for the coating to fully cure?
The coating is dust-dry in 1-1.5 hours but requires approximately 7-8 days to fully cure.
What are the mixing instructions for this 2K product?
Refer to the product's technical data sheet for the exact mixing ratio of the base and activator. Proper mixing is crucial for performance.
Can this coating be used on wood or plastic surfaces?
This product is specifically engineered for metal surfaces and machinery exposed to high stress. Compatibility with wood or plastic would require specific testing and primers.
What is the maximum temperature this coating can withstand?
It offers heat resistance up to 180°C for short-term exposure.
What primers are compatible with this topcoat?
The RT 2K PU Topcoat is compatible with WEP Primers to ensure maximum adhesion and durability.
Troubleshooting
Poor adhesion
Ensure the surface was properly prepared, cleaned, and primed with a compatible WEP primer. Verify correct mixing ratios of the 2K components.
Uneven finish or "orange peel"
Adjust spray application technique (distance, speed, pressure) and ensure proper viscosity. Verify ambient temperature and humidity are within recommended application ranges.
Coating remains soft or tacky after extended time
Check that the correct hardener was used and that the 2K components were mixed thoroughly and in the specified ratio. Ensure application and curing conditions (temperature, humidity) are suitable.
Surface scratching easily
Allow the coating to cure for the full 7-8 days to achieve maximum hardness. Avoid exposing the surface to abrasion before full cure.
Pros and Cons
Pros
- Excellent resistance to mechanical and chemical stress.
- Superior UV and weather protection for outdoor applications.
- Durable semi-gloss finish enhances appearance and longevity.
- Extended open time allows for easier application on large areas.
- Fast initial drying time reduces dust contamination risk.
Cons
- Full cure takes 7-8 days, requiring patience for maximum durability.
- Requires specific primer compatibility (WEP Primers) for optimal performance.
- As a 2K system, requires proper mixing ratios and handling.
- The 100ml sample size is suitable for testing or small projects only.
Setup, Compatibility & Care
To achieve optimal results, ensure the surface is clean, dry, and free from contaminants before application. The RT 2K PU Topcoat is designed to be compatible with WEP Primers; using these primers will ensure maximum adhesion and durability. This is a 2K (two-component) system, meaning the base and activator must be mixed in the correct proportions according to the manufacturer's instructions. Once mixed, adhere to the pot life and recoat times specified. For cleaning tools and equipment, use appropriate water-based cleaning solutions immediately after use. The coated surface should be protected from harsh cleaning chemicals and heavy abrasion until fully cured. Avoid exposure to moisture during the initial drying phase.