Ft Paints 1.10L Kit Water-Based Polyurethane Paint - Ral 6005-Moss Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This 1.10L kit of FabioT. RT 2K PU Topcoat in Ral 6005-Moss Green is designed for professionals and DIY enthusiasts needing a durable, semi-gloss finish for vehicles, machinery, and metal structures facing harsh conditions. Its key benefit is superior protection against mechanical and chemical stress, with excellent UV and weather resistance. A potential caveat is the 7-8 day full cure time, requiring patience for optimal durability.
All features
| Colour | Green |
|---|---|
| Model Part Number | FT-WPU2425-P0.73L-H0.18L-T0.19L-G-IE |
| Brand | FabioT. |
Extended Product Information
FAQs
What is the shelf life of the RT 2K PU Topcoat kit?
Refer to the product packaging or technical data sheet for the specific shelf life, as it can vary based on storage conditions. Ensure the container is sealed tightly when not in use.
Can this paint be applied with a brush or roller?
While spray application is recommended for best results, brushing or rolling might be possible with specific techniques and thinning. Consult the technical data sheet for detailed guidance on application methods.
How long does it take for the paint to be fully cured?
The paint will be dust-dry in 1-1.5 hours. However, it requires a full 7-8 days to reach its maximum hardness and chemical resistance for optimal durability.
What safety precautions should I take when using this product?
Always use in a well-ventilated area. Wear appropriate personal protective equipment (PPE), including gloves, eye protection, and a respirator suitable for organic vapors. Refer to the Safety Data Sheet (SDS) for comprehensive safety information.
Can I recoat the surface after the initial application?
Yes, recoating is possible. Ensure the previous coat is dry to touch and lightly abraded if necessary. Check the technical data sheet for recommended recoat windows and procedures.
What is the coverage rate of this 1.10L kit?
Coverage rates vary depending on the application method and surface porosity. Consult the product's technical data sheet for specific coverage information based on recommended film thickness.
Is this paint suitable for interior use?
Yes, the waterborne polyurethane formula is suitable for interior applications where high durability and resistance to wear are required. Ensure proper ventilation during application and curing.
Troubleshooting
Uneven finish or streaking
Ensure proper mixing of paint and hardener. Adjust spray gun settings (pressure, nozzle size) and maintain consistent application speed and distance.
Poor adhesion
Verify that the surface was properly prepared and cleaned. Ensure compatibility with the primer used and check the mixing ratios.
Coating remains soft after extended drying time
Check environmental conditions (temperature, humidity). High humidity or low temperatures can slow down the curing process. Ensure correct hardener and thinner ratios were used.
Bubbling or pinholing
Ensure the product was applied within its pot life. Avoid over-application and ensure proper ventilation during application to allow solvents to escape.
Pros and Cons
Pros
- Excellent durability for high-stress applications
- Superior resistance to chemicals, solvents, and scratches
- Long-lasting UV and weather protection for outdoor use
- Fast drying time to dust
- Suitable for high-temperature environments
Cons
- Full cure time of 7-8 days requires patience
- Requires compatible WEP primers for maximum adhesion
- Waterborne polyurethane may have specific application requirements
- Kit size (1.10L) may be insufficient for very large projects
Setup, Compatibility & Care Instructions
Setup:
- Ensure the surface is clean, dry, and free from contaminants. Proper surface preparation is crucial for optimal adhesion.
- Mix the paint and hardener in the recommended ratio, followed by the thinner if necessary, according to the product's technical data sheet.
- Apply using appropriate spraying equipment for an even coat.
Compatibility:
- This product is compatible with FabioT. WEP Primers for single or multi-coat systems.
- Ensure all application equipment is clean and compatible with waterborne polyurethane coatings.
Care:
- Clean surfaces with mild detergents and water. Avoid abrasive cleaners or harsh solvents that could compromise the finish.
- For the first 7-8 days, avoid heavy cleaning or subjecting the coated surface to significant stress to allow for full curing.