Ft Paints 100 Ml Sample Water-Based Polyurethane Paint For Industrial Equipment - Silver Grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and DIY enthusiasts seeking a durable, high-performance coating for vehicles, machinery, and metal structures. The FabioT. RT 2K PU Topcoat offers exceptional resistance to mechanical stress, chemicals, UV, and weather, providing a semi-gloss finish that enhances longevity and appearance. A key consideration is the 2K (two-component) nature, requiring proper mixing and application techniques.
All features
| Colour | Silver |
|---|---|
| Model Part Number | 2K PU Topcoat |
| Brand | FabioT. |
Extended Product Information
FAQs
What is the shelf life of the RT 2K PU Topcoat sample?
Once mixed, the pot life is limited. Unmixed components should be stored in a cool, dry place. Refer to the product packaging for specific shelf-life details.
How do I properly mix the 2K components?
Carefully read the mixing instructions on the product label. Typically, this involves combining the base and hardener in a precise ratio and stirring thoroughly for a specified duration.
Can I use this on plastic surfaces?
This topcoat is primarily engineered for vehicles, machinery, and metal structures. Compatibility with plastics may vary; testing on a small, inconspicuous area is recommended before full application.
What is the coverage rate for this sample size?
The 100 ml sample size is intended for testing, small touch-ups, or specific applications where a small amount of high-performance coating is needed. Coverage will depend on the substrate and application thickness.
Is this coating suitable for food-contact surfaces?
This product is not designed for food-contact applications. Please consult the manufacturer for specific product lines that meet food-grade certifications.
What safety precautions should I take when using this product?
Always use in a well-ventilated area. Wear appropriate personal protective equipment, including gloves, eye protection, and a respirator if spraying. Refer to the Safety Data Sheet (SDS) for detailed information.
How long does it take for the coating to be fully cured?
The coating is dust-dry in 1-1.5 hours, but full curing takes approximately 7-8 days, after which it will achieve its maximum hardness and resistance properties.
Troubleshooting
Uneven finish or "orange peel" effect
Adjust spray gun distance, speed, and pressure. Ensure proper mixing of the 2K components and adequate stirring.
Coating not drying properly
Verify correct mixing ratio of components. Ensure application environment is within recommended temperature and humidity ranges. Check for inadequate ventilation.
Poor adhesion to the surface
Ensure the substrate is clean, dry, and free from contaminants. Verify compatibility with the underlying primer or substrate. Sand and re-prime if necessary.
Solvent resistance is not as expected
Confirm full curing has been achieved (7-8 days). Re-check mixing ratios and application thickness. Ensure the correct WEP primer was used if applicable.
Pros and Cons
Pros
- Excellent resistance to mechanical and chemical stress for industrial applications.
- Superior UV and weather resistance ensures long-term outdoor durability.
- Fast drying times contribute to efficient project completion.
- High heat resistance up to 180°C for demanding environments.
- Extended open time aids in achieving a smooth, even finish on large areas.
Cons
- Requires precise mixing of two components (2K system).
- Aerosol sample size limits coverage for large projects.
- Application may require specialized spray equipment for optimal results.
- Proper ventilation and personal protective equipment are essential during use.
- Curing time of 7-8 days means the surface is not immediately ready for heavy use.
Setup, Compatibility & Care
Setup:
This is a 2K (two-component) coating. Ensure the hardener and base components are mixed in the correct ratio as specified by the manufacturer for optimal performance. Typically, this involves combining the contents of the sample can and vigorously stirring until fully integrated. Allow for the recommended induction time if specified.
Compatibility:
This topcoat is designed to be compatible with FabioT. WEP Primers. For best results and maximum adhesion, ensure surfaces are properly prepared and primed using a compatible WEP primer. It is suitable for application over various substrates including properly prepared metal and previously coated surfaces.
Care:
Clean surfaces using mild detergents and water. Avoid abrasive cleaners or solvents that could compromise the coating's integrity. For maintenance, a simple wipe-down is usually sufficient. Ensure the surface is dry after cleaning. Due to its robust nature, the coating is designed for low maintenance.