Dulux All Weather Protection Smooth Masonry - Red

This paint is formulated to provide up to 15 years of all-weather protection for your exterior walls.

No, this paint is not suitable for use on common or Fletton bricks. It is designed for other masonry surfaces like render, concrete, and suitable brickwork.

For best results and optimal protection, you should apply 2 coats of Dulux Weathershield Smooth Masonry Paint.

You should allow 4 hours of drying time between each coat.

'Stay Clean' technology is a unique formulation within the paint film that helps protect against dirt accumulation and mould growth, keeping your exterior walls looking cleaner for longer.

The Weathershield Promise is Dulux's commitment that if your walls peel, flake, or show mould growth within the paint film while you live in your home, they will provide a replacement product. Registration and application within 6 months of purchase are required to activate it.

This paint offers coverage of up to 15m² per litre, depending on the porosity and texture of the surface.

No, for best results and proper adhesion, apply only in dry conditions, when the temperature is above 10°C, and when bad weather is not forecast.

Register your product to activate the Weathershield Promise. Ensure the paint was applied within 6 months of purchase and follow all application guidelines, especially surface preparation, as improper preparation can lead to these issues. If all conditions are met, contact Dulux for a replacement product as per the promise.

This often occurs if multiple cans of paint were used without mixing them together. For best results, always mix all cans of the same colour together in a larger container before starting to paint to ensure a consistent shade. Also, ensure two full coats have been applied evenly.

Check the environmental conditions. This paint requires application in dry conditions and above 10°C. High humidity or low temperatures can significantly extend drying times. Avoid painting when bad weather is forecast.

Ensure the wall was thoroughly dry and clean before application. Loose material, dirt, or moisture on the surface can prevent proper adhesion. Ensure you are not painting common or Fletton bricks, as the paint is not compatible with these surfaces.