Sandtex Exterior Gloss Paint - Red
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking to protect and beautify their exterior wood and metal surfaces with a high-quality, weather-resistant paint. The Sandtex Exterior Gloss Paint in Pillar Box Red offers long-lasting protection and a vibrant finish, enhancing your property's curb appeal. Keep in mind that achieving the best results requires proper surface preparation and adherence to the recoating time.
All features
| Colour | Red |
|---|---|
| Brand | Sandtex |
Extended Product Information
FAQs
What surfaces can I use this paint on?
This paint is suitable for use on exterior wood and metal surfaces.
How much area does a 750ml tin cover?
A 750ml tin covers up to 11 m² on average.
How should I prepare the surface before painting?
Ensure the surface is clean, dry, and free from loose paint, dirt, and grease. Lightly sand if needed.
How many coats are needed?
For best results, apply two coats, allowing 15 hours between coats.
What type of brush should I use?
Use a brush suitable for gloss paint. A synthetic bristle brush is often recommended.
How long should I wait before recoating?
Allow 15 hours between coats.
How do I clean the brushes?
Clean brushes with the appropriate solvent immediately after use.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean, dry, and properly prepared. Lightly sand and prime if necessary.
Uneven finish.
Apply the paint in even coats and avoid overbrushing. Ensure proper application technique.
Paint is taking too long to dry.
Ensure adequate ventilation and avoid painting in very humid or cold conditions. Check recoat times.
Pros and Cons
Pros
- Long-lasting weather protection
- Easy to apply
- Suitable for wood and metal surfaces
- Gloss finish enhances appearance
Cons
- Requires proper surface preparation for optimal results
- Recoating time of 15 hours must be observed
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from any loose or flaking paint, dirt, grease, or wax. Lightly sand the surface if necessary.
- Application: Stir the paint thoroughly before use. Apply with a brush, ensuring an even coat.
- Recoating: Allow 15 hours between coats.
- Compatibility: Suitable for use on wood and metal surfaces. Always check for compatibility with existing coatings.
- Care: Clean brushes with the appropriate solvent after use. Store paint in a cool, dry place and keep the lid sealed when not in use.