Dulux Trade Weathershield Undercoat - Dark Grey - 1L

The coverage is up to 16m² per litre, depending on the surface.

This undercoat is suitable for use on wood, primed metal, and plastic.

Generally, one or two coats of the undercoat are recommended, depending on the surface and the desired finish. Always follow with a topcoat.

The minimum drying time is 2 hours, with a maximum of 6 hours, before recoating.

Yes, it is recommended to use a primer, such as Dulux Trade Weathershield Exterior Preservative Primer, on new or bare wood before applying the undercoat for optimal results.

This undercoat has a matt finish.

No, this product is designed specifically for exterior use.

Clean brushes with brush cleaner after use, removing as much paint as possible beforehand.

Ensure the surface is properly prepared, clean, and dry before application. Lightly sand the surface to improve adhesion. Check surface for any contamination and remove it.

Ensure the undercoat is part of a complete system. Make sure the wood is not excessively damp before applying the paint. Allow adequate drying time between coats.

Stir the paint thoroughly before use. Apply an even coat and avoid applying too much paint at once. Apply a second coat if required, after the recommended drying time.