Dulux Trade Weathershield Exterior Undercoat - Tinted Colour Match - 5L

This is a flexible undercoat, designed as Part 2 of a 3-part paint system for exterior woodwork, providing enhanced protection and durability.

When used as part of the full Dulux Trade Weathershield 3-part system, it offers up to 8 years of weathering durability.

No, this paint is mixed to order and cannot be returned or exchanged.

It is suitable for primed wood, metal, and plastic surfaces.

Two coats of the Weathershield Exterior Flexible Undercoat are recommended for optimal performance.

You will need Part 1: Weathershield Preservative Primer+ and Part 3: Weathershield Exterior High Gloss.

No, for health and safety reasons related to solvent-based paints, spray application is not recommended. Apply by brush only.

Remove as much paint as possible from brushes, then clean with white spirit or a suitable brush cleaner.

Ensure the surface was properly prepared, clean, dry, and free from dust or contaminants before application. Verify that the correct primer (Part 1 of the system) was used and allowed adequate drying time.

This may indicate insufficient flexibility, possibly due to improper application temperature or an incompatible topcoat. Ensure two coats of undercoat were applied and that the correct Weathershield High Gloss topcoat (Part 3) is used.

Ensure even application of the undercoat. If brush marks are visible, try applying with lighter, more even strokes. Ensure adequate drying time between coats.

Stir thoroughly before use. If storage conditions were too cold, allow the paint to return to room temperature. This product is solvent-based and not designed for thinning.