Palatine Paints Coach Enamel Paint - Green - 1000ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for vehicle restorers, fleet managers, and DIY enthusiasts seeking a durable, solvent-based coating for a variety of vehicles. The key benefit is its robust finish suitable for cars, motorbikes, tractors, and railway locomotives. A caveat is its solvent-based nature, requiring good ventilation. This guide covers its features, practical applications, setup, and care.
All features
| Colour | Green |
|---|---|
| Brand | Palatine Paints |
| Container Volume | 1000 |
Extended Product Information
FAQs
What is the best way to apply Palatine Paints Coach Enamel?
You can apply it with a good quality brush or roller. For spraying, thin with a suitable solvent to the correct viscosity and use in a well-ventilated area.
How long does it take for the paint to dry?
The paint is touch dry in approximately 2 hours at 20°C. Full curing and recoating times will be longer.
Can I use this paint on plastic parts?
This is a solvent-based enamel and may not be suitable for all plastics without appropriate priming. It is best suited for metal surfaces. Always test on a small area first.
Is this paint available in other colours besides Green?
Yes, Palatine Paints Coach Enamel is available in a wide range of colours, including specific RAL Classic, BS 4800, and BS 381C standards.
What is the container size for this specific product?
This product comes in a 1000ml container.
What type of solvent should I use for thinning or cleaning?
A standard white spirit is typically suitable for thinning and cleaning tools. Always refer to product-specific recommendations if available.
What surfaces is this enamel most suitable for?
It is designed for durable coating on vehicles such as cars, motorbikes, tractors, and railway locomotives, primarily on metal components.
Troubleshooting
Paint is too thick to apply smoothly.
Stir the paint thoroughly. If still too thick, thin with a small amount of appropriate solvent (e.g., white spirit) until desired consistency is reached. Ensure you are in a well-ventilated area when thinning.
Uneven finish or brush marks visible.
Ensure the surface is properly prepared and smooth. Apply paint with even strokes, working in one direction. Use a high-quality brush or roller suitable for solvent-based paints. Consider applying a second, thinner coat for a more uniform finish.
Paint not drying properly.
Check ambient temperature and humidity; drying times are estimates and can be affected by conditions. Ensure adequate ventilation. Avoid applying excessively thick coats, as this can hinder drying.
Poor adhesion to the surface.
Verify the surface was properly cleaned and prepared. Ensure the correct primer was used for the substrate. Lightly abrading the surface before application can improve adhesion.
Pros and Cons
Pros
- Excellent durability for heavy-duty applications.
- Fast drying time improves workflow.
- Wide applicability across various vehicle types.
- Consistent colour availability in standard ranges.
- Robust, solvent-based formula offers superior protection.
Cons
- Requires good ventilation due to solvent base.
- May not be suitable for all modern plastic components without proper priming.
- Solvent-based nature may have environmental considerations for some users.
- Application might require specialized knowledge for optimal results.
- Not a water-based alternative.
Setup, Compatibility & Care
Preparation: Ensure the surface is clean, dry, and free from grease, oil, and contaminants. For best adhesion, lightly abrade previously painted surfaces. Bare metal should be primed with an appropriate metal primer.
Application: Stir the paint thoroughly before use. Apply using a good quality brush or roller. For spraying, thin with a suitable solvent (e.g., white spirit) to achieve the desired viscosity. Apply in a well-ventilated area.
Drying: The paint is touch dry in approximately 2 hours at 20°C. Recoating is possible after 4-6 hours, depending on conditions.
Compatibility: This solvent-based enamel is compatible with most metal surfaces when properly primed. It is also available in various colour standards (RAL, BS) which can be matched with other Palatine Paints products. Always test compatibility on a small, inconspicuous area first.
Care: Clean application tools immediately after use with a suitable solvent. For the painted surface, regular cleaning with mild detergents and water is recommended. Avoid abrasive cleaners or solvents that could damage the finish.