Best current price£31.67from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£31.67Visit shop Palatine Professional Coach Enamel Paint (1 Litre, ) White 5055671715314
Visit shop1 offer from £31.67
View price history by clicking the chart icon.
This durable, solvent-based coach enamel in white is ideal for vehicle owners and restoration enthusiasts working on cars, motorbikes, tractors, and railway locomotives. Its key benefit is long-lasting protection and a high-quality finish that requires minimal maintenance. A potential caveat is that it is a solvent-based coating, requiring appropriate ventilation during application.
| Colour | White |
|---|---|
| Brand | Palatine Paints |
| Container Volume | 1000 |
This paint is suitable for a range of vehicles including cars, motorbikes, tractors, and railway locomotives.
The paint is touch dry in approximately 2 hours under normal conditions.
Yes, its durable and resistant nature makes it suitable for various environmental factors encountered outdoors.
The painted surface can be easily cleaned with mild soap and water. Minor scratches can often be buffed out.
Surface preparation is key. Ensure the surface is clean, dry, and free from contaminants. Light abrasion can improve adhesion. Specific primers may be recommended for certain substrates or extreme conditions; consult the product's technical data sheet if available.
Apply using a brush or spray gun in a well-ventilated area. Stir the paint thoroughly before and during use. Follow the manufacturer's recommendations for application technique and viscosity.
Yes, a second coat can be applied once the first coat is touch dry.
Ensure application conditions are within the recommended temperature and humidity range. Check for adequate ventilation. Ensure the correct thinner (if used) was applied according to specifications.
Stir paint thoroughly before and during application. Apply paint evenly with smooth, consistent strokes. Consider using a higher quality brush or spray equipment. Ensure the paint is at the correct viscosity for application.
Verify the surface was properly cleaned and prepared before application. Ensure no contaminants like oil or grease were present. Lightly abrading the surface prior to painting can improve adhesion.
Stir the paint well. If necessary, add a small amount of appropriate solvent to thin the paint, following manufacturer guidelines. If too thin, allow it to thicken slightly in an open container (with ventilation).
Preparation: Ensure the surface to be painted is clean, dry, and free from grease, dirt, and rust. Lightly abrading the surface can improve adhesion. For optimal results, apply in a well-ventilated area. Ensure ambient temperature is suitable for painting.
Application: This is a solvent-based coating. Apply using a brush or spray gun according to manufacturer recommendations. A second coat may be applied after the first coat is touch dry. Stir the paint thoroughly before and during use.
Compatibility: Suitable for various vehicle types including cars, motorbikes, tractors, and railway locomotives. It is designed as a durable topcoat.
Care: Clean the painted surface with mild soap and water. Minor scratches or imperfections can often be buffed out to restore the finish. Avoid using abrasive cleaners or solvents that could damage the coating.
