Palatine Paints Professional Coach Enamel Paint - Oxford Blue - 2500ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Palatine Paints Professional Coach Enamel in Oxford Blue is designed for professionals and enthusiasts seeking a durable, solvent-based coating for vehicles like cars, motorbikes, tractors, and railway locomotives. Its key benefit is a tough, resilient finish that is touch-dry in just 2 hours, minimizing downtime. A potential consideration is its solvent-based nature, requiring appropriate ventilation and personal protective equipment during application. This 2500ml container provides ample coverage for larger projects.
All features
| Colour | Blue |
|---|---|
| Brand | Palatine Paints |
| Container Volume | 2500 |
Extended Product Information
FAQs
What type of thinner should I use for this paint?
A standard white spirit or a dedicated coach enamel thinner is typically recommended for dilution and cleaning. Always test in an inconspicuous area first.
How many coats of this paint are usually needed?
Generally, two to three thin coats provide the best coverage and durability. This can vary depending on the application method and the colour being applied.
Can this paint be used on wood or plastic?
This paint is primarily designed for metal surfaces. For wood or plastic, a specific primer designed for those materials should be used first to ensure adhesion.
What are the specific colour standards mentioned?
The paint is available in RAL classic, BS 4800, and BS 381C colour standards, which are widely used industrial colour matching systems.
How should I store the remaining paint?
Store in the original sealed container in a cool, dry place, away from direct sunlight and sources of ignition. Ensure the lid is tightly closed to prevent skinning.
What is the shelf life of this product?
When stored correctly in a sealed container, the paint typically has a shelf life of several years. However, it's best to use it within the first 1-2 years for optimal performance.
Troubleshooting
Paint is too thick for spraying.
Dilute with a compatible thinner (e.g., white spirit or coach enamel thinner) gradually until the desired spraying viscosity is achieved. Refer to manufacturer recommendations for specific dilution ratios.
Uneven finish or brush marks visible.
Ensure even application and use a good quality brush. Apply thin, even coats rather than one thick coat. Allow adequate drying time between coats.
Poor adhesion to the surface.
Verify the surface was properly prepared, clean, and dry before application. Ensure a suitable primer was used if required for the substrate.
Paint is not drying properly.
Check application environment for excessively high humidity or low temperatures, which can slow drying. Ensure correct thinner was used and not over-applied.
Pros and Cons
Pros
- Excellent durability and protective qualities.
- Quick drying time increases efficiency.
- Suitable for a broad spectrum of vehicle types.
- Wide availability of colours through standard industrial palettes.
- Generous 2500ml volume offers good value for large projects.
Cons
- Solvent-based formula requires good ventilation and safety precautions.
- May require specific thinners for application.
- Not suitable for all substrates without proper preparation.
- Long-term colour consistency may depend on application conditions.
Setup, Compatibility & Care
Preparation: Ensure the surface to be painted is clean, dry, and free from grease, wax, and rust. Abrade lightly if necessary for optimal adhesion. A suitable primer may be required depending on the substrate and desired finish.
Application: This paint is typically applied by brush, roller, or spray. If spraying, dilution with a suitable solvent (e.g., white spirit or a specific coach enamel thinner) may be necessary to achieve the correct viscosity. Apply in a well-ventilated area, wearing appropriate personal protective equipment including gloves, eye protection, and respiratory protection.
Compatibility: Compatible with most primed metal surfaces on vehicles. Not recommended for direct application to plastics or rubber without a suitable adhesion promoter.
Care: Clean applied surfaces with mild detergent and water. Avoid abrasive cleaners or solvents that could damage the paint finish. For best longevity, protect from extreme weather conditions where possible.