Palatine Paints Professional Coach Enamel Paint - Light Aircraft Grey - 1000
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for users needing a durable, solvent-based coating for vehicles such as cars, motorbikes, tractors, and railway locomotives. The key benefit is its robust finish suitable for demanding environments. A potential caveat is its solvent-based nature, requiring appropriate ventilation and safety measures. This 1000ml tin of Light Aircraft Grey paint offers a versatile and reliable solution for various industrial and automotive applications.
All features
| Colour | Grey |
|---|---|
| Brand | Palatine Paints |
| Container Volume | 1000 |
Extended Product Information
FAQs
What is the recommended application method?
This paint can be applied by brush or spray gun. For spray application, thinning with a suitable solvent may be necessary.
How long does it take to become touch dry?
The paint is touch dry in approximately 2 hours under normal conditions.
Can this paint be used on wood or plastic?
This product is specifically designed for metal surfaces on vehicles. Compatibility with wood or plastic is not guaranteed and would require specialized primers.
Is this paint available in other colors?
Yes, this paint is also available in other colors from the RAL classic, BS 4800, and BS 381C ranges.
What is the container volume of this specific product?
This particular product is a 1000ml (1 litre) container.
What safety precautions should I take?
Apply in a well-ventilated area due to its solvent-based nature. Wear appropriate personal protective equipment, including gloves and eye protection.
How should I store the paint?
Store the paint in a cool, dry place, away from direct sunlight, heat sources, and frost. Ensure the lid is tightly sealed.
Troubleshooting
Paint not drying properly
Ensure application was within the recommended temperature and humidity range. Check if the surface was properly prepared and if adequate ventilation is present. Do not over-apply the paint.
Poor adhesion or flaking
The surface may not have been adequately prepared (cleaned, degreased, or primed). Ensure all contaminants were removed before application and that primer was used on bare metal.
Brush marks visible
Apply paint more smoothly, using lighter strokes. Consider thinning the paint slightly for spray application or using a higher quality brush for better finish.
Uneven color finish
Ensure the paint was thoroughly mixed before and during application. Apply coats evenly, maintaining a consistent wet edge. Ensure sufficient paint is loaded onto the brush or spray gun.
Pros and Cons
Pros
- Excellent durability for demanding environments.
- Quick drying time speeds up workflow.
- Versatile application across many vehicle types.
- Available in a wide range of standard colors.
- Professional-grade finish.
Cons
- Solvent-based formula requires good ventilation.
- May not be suitable for all substrates without proper preparation.
- Longer drying times in cold or humid conditions.
- Specific disposal requirements for solvent-based products.
- Not a low-VOC or water-based option.
Setup, Compatibility & Care
Preparation: Ensure the surface to be painted is clean, dry, and free from grease, rust, and old flaking paint. For best results, prime metal surfaces with an appropriate metal primer. Stir the paint thoroughly before use.
Application: Apply using a brush or spray gun. For spray application, thinning may be required with a suitable solvent. Apply in a well-ventilated area, ideally between 10°C and 25°C.
Compatibility: This paint is suitable for metal surfaces on vehicles such as cars, motorbikes, tractors, and railway locomotives. It is also available in other color standards like RAL, BS 4800, and BS 381C, allowing for color matching.
Care: Once fully cured, the painted surface can be cleaned with mild detergents and water. Avoid abrasive cleaners or solvents that could damage the coating. Store tins in a cool, dry place away from direct sunlight and frost.