Palatine Professional Coach Enamel Paint - Brunswick Green - 1000ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Palatine Professional Coach Enamel Paint in Brunswick Green (1000ml) is designed for durable, solvent-based coatings on vehicles like cars, motorbikes, tractors, and railway locomotives. Its key benefit is a tough finish that is touch-dry in just 2 hours. A potential consideration is that it is a solvent-based product, requiring appropriate ventilation and handling precautions. It is also available in a wide range of standard colour systems.
All features
| Colour | Green |
|---|---|
| Brand | Palatine Paints |
| Container Volume | 1000ml |
Extended Product Information
FAQs
What surfaces can I use this paint on?
This paint is suitable for vehicles including cars, motorbikes, tractors, and railway locomotives. It provides a durable coating on metal surfaces.
How long does it take to dry?
The paint is touch dry in approximately 2 hours under normal conditions. Drying time can be affected by temperature, humidity, and film thickness.
Can I use this paint indoors?
Due to its solvent-based nature, it should only be used in extremely well-ventilated areas. Ensure adequate safety precautions are taken.
What colours are available besides Brunswick Green?
This range is also available in RAL classic, BS 4800, and BS 381C colours, including Grey, Red, White, Blue, and Yellow.
How do I clean my brushes after use?
Clean brushes and equipment immediately after use with a suitable solvent, such as white spirit.
What is the container volume?
This specific product is a 1000ml container. Larger and smaller volumes may be available for other colours in the range.
Is this paint suitable for exterior use?
Yes, the durable and solvent-based formulation is designed for exterior vehicle applications and protection against the elements.
Troubleshooting
Paint is too thick for application
Thin with a small amount of appropriate solvent (e.g., white spirit) according to manufacturer recommendations and test on a scrap surface. Ensure the ambient temperature is suitable for application.
Uneven finish or brush marks visible
Ensure paint is thoroughly stirred. Apply thin, even coats. Use a high-quality brush or roller suitable for solvent-based paints. Avoid overworking the paint.
Poor adhesion or peeling
Verify that the surface was properly prepared, clean, and dry. Ensure appropriate primer was used and that the paint is compatible with the underlying surface. Check for excessively humid conditions during application.
Paint not drying properly
Ensure application conditions are within the recommended temperature and humidity range. Avoid applying excessively thick coats. Check for contamination on the surface.
Pros and Cons
Pros
- Excellent durability for demanding environments
- Quick drying time speeds up work
- Suitable for a wide range of vehicles
- Available in many standard colour systems
- Professional-grade finish
Cons
- Solvent-based, requiring good ventilation and safety measures
- May require specialized application techniques for optimal results
- Drying times can be affected by temperature and humidity
Setup, Compatibility & Care
Setup: Ensure the surface to be painted is clean, dry, and free from grease, dirt, and rust. Lightly abrade glossy surfaces to improve adhesion. For optimal results, apply in a well-ventilated area away from dust and moisture. Stir the paint thoroughly before and during use. Application can be by brush, roller, or spray.
Compatibility: This is a solvent-based coating and is generally compatible with most conventional primers. Always test on an inconspicuous area if unsure. Not recommended for use on surfaces not intended for solvent-based paints.
Care: Keep the container tightly closed when not in use. Store in a cool, dry place away from direct sunlight and sources of ignition. Clean brushes and equipment immediately after use with a suitable solvent (e.g., white spirit). The dried coating can be wiped clean with a damp cloth; avoid abrasive cleaners.