Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust and grease. Prime any bare plaster with a suitable primer. For previously painted surfaces in good condition, use a mist coat of the Modern Emulsion thinned with water (10% water to paint). For a uniform finish, it is recommended to use Farrow & Ball primers and undercoats in a similar tone.
Application: Apply two coats of Modern Emulsion with a brush or roller. For best results, avoid cutting in too far ahead of the main coat. Allow at least 4 hours between coats.
Compatibility: Suitable for interior walls and ceilings. Not recommended for high-gloss finishes or exterior surfaces.
Care: Clean gently with a damp cloth or sponge and mild soap if necessary. Avoid abrasive cleaners or scouring pads, which can damage the finish.