Farrow & Ball Exterior Masonry Paint - Skimming Stone

It is ideal for exterior brick, render, and concrete. It can also be used on exposed interior stone or brick, as well as garden walls, flower pots, and other outdoor ornaments.

Two coats are generally recommended for full coverage and optimal protection against the elements.

It dries quickly, with recoat times typically around 2-4 hours depending on conditions. Full cure takes longer.

No, this paint is specifically formulated for walls and vertical masonry surfaces, not for floors.

It provides a beautiful, protective super matt finish.

No, being a water-based formulation, it has minimal odour compared to solvent-based paints.

For general maintenance, wipe the surface gently with a damp cloth. Avoid using abrasive cleaners.

Surfaces must be clean, dry, and free from loose material. For bare or porous surfaces, a suitable Farrow & Ball primer and undercoat system is recommended for best adhesion and durability.

This is often due to inadequate surface preparation. Ensure the surface was clean, dry, and properly primed if necessary. Check for moisture issues behind the paint.

Ensure sufficient coats were applied and that paint was stirred thoroughly. For best results, use the recommended Farrow & Ball primer and undercoat system, and apply paint evenly, avoiding over-brushing.

This indicates moisture migrating through the brick. Ensure the masonry is properly breathable and that there are no underlying water ingress issues. Use a masonry-specific primer designed to seal or bridge efflorescence if recommended for your specific situation.