Dulux Heritage Velvet Matt Emulsion Paint - Midnight Teal

This paint has a beautifully soft velvet matt finish. This provides a luxurious, low-sheen appearance that helps absorb light and create a sophisticated atmosphere.

Info needed: Typical coverage for Dulux Heritage Velvet Matt is approximately 13-16 square meters per litre, so a 2.5L tin might cover around 32.5-40 square meters with one coat. Actual coverage varies based on surface porosity and texture.

While it's designed for interior walls and ceilings, for high-humidity areas like bathrooms or kitchens, a specific bathroom or kitchen paint with enhanced moisture and mould resistance is generally recommended for optimal longevity and performance against condensation.

A primer is highly recommended for new, bare, or porous surfaces (e.g., new plasterboard). It's also advisable if you're painting over a significantly darker or lighter existing colour to ensure better adhesion, truer colour, and a more even finish.

The paint is typically touch dry in 2-4 hours. You should allow 4-6 hours before applying a second coat. These times can vary depending on room temperature and humidity levels.

Yes, `Midnight Teal` can be excellent for small rooms. Its depth of colour can create a cozy, intimate feel. By using a tone-on-tone technique (painting walls and woodwork the same colour), you can actually make a small room feel more expansive and cohesive, rather than confined.

Clean up spills and drips immediately with warm soapy water while the paint is still wet. Once dry, the paint is much harder to remove and may require a scraper or paint stripper.

Ensure the paint is thoroughly stirred. Apply paint evenly, maintaining a wet edge. Avoid overworking the paint. Ensure adequate drying time between coats and use good quality application tools.

Always test a small patch on the wall in different lighting conditions before full application. Colour can be influenced by room lighting, surrounding colours, and surface texture. Allow paint to fully dry as wet paint can look different.

Ensure surfaces were properly prepared: clean, dry, free of loose material, and primed if necessary (especially on new, bare, or glossy surfaces). Adhesion issues are often due to insufficient surface preparation.

Ensure good ventilation in the room by opening windows and doors. Avoid applying paint in very humid conditions or at low temperatures (below 10°C). Over-applying thick coats can also extend drying times.